Home > Sensor Mounting > Extension Cables >

CMCP602H High Temperature FEP 2 Pin MS 5015 Sensor Cable

Accelerometer Extension Cable


 
Alternative Views:


CMCP602H High Temp Cable Datasheet
US MSRP: $59.00


Product Code: CMCP602H

CMCP602H Length

  
Connector Type

  
Armor

  
CMCP600 Cable End

  

Description
 
The CMCP602H Series High Temperature Accelerometer Extension Cables are designed for use piezoelectric accelerometers featuring a 2 pin Mil Spec MS 5015 connector (standard 2 pin). The CMCP602H Series are a 2 wire design utilizing 20AWG twisted/shielded conductors with an overall braided copper shield for high noise immunity to maximize the signal quality of the sensor connected to the monitoring system or field junction box. The overall red FEP provides excellent temperature, chemical and sunlight protection while also providing the flexibility required to install cables in rigid conduit. Each cable assembly is fitted with a 2 Pin MS 5015 connector that is fully encapsulated with epoxy to ensure water resistance. The CMCP602H Series cables come standard with a blunt cut end to allow for direct connections to field junction boxes or monitoring systems. Spade lugs or a BNC connector may also be added to the fly end of the cable prior to delivery. CMCP602H Series cables are 0.195” in diameter and are stocked in 16’, 32’ and 64’ lengths though any length can be provided by specifying the exact cable length in feet at the time of ordering.


CMCP602H High Temp Cable Datasheet
Features
• 2 Pin MS 5015 Mil Spec Connector
• -55 to 200⁰C (-67 to 392⁰F) Temperature Rating
• 20 AWG Twisted Shielded Cable
• Red FEP Jacket
• Braided Copper Shielding
• Epoxy Filled, Water Tight Connector Backshell
• Santoprene™ Strain Relief Boot
• UV and Oil Resistant
• Optional Locking Collar or Push On Seal Tight Connector

• Optional Stainless Steel Hose or Braided Armor


Browse for more products in the same category as this item:

Sensor Mounting > Extension Cables