The CMCP-DVS a single channel microprocessor
controlled vibration switch with two (2) alarm levels with associated
relays. Alarm levels are completely programmable and can be either
latching or non-latching. It has a 4 Digit 0.5” high Red LED Display
along with LED alarm indicators and is available in English or Metric
units. Standard setup is 0 – 1.0 in/sec (0 – 25.4 mm/sec), Non-Latching
and 3 second delay The Sensor module mounted in the bottom of the
housing uses a 100 mv/g IEPE Accelerometer and converts the signal to
True RMS Velocity.
It is designed to be mounted directly to rotating
machinery and prevent catastrophic failure by shutting down the machine
when vibration levels become excessive. Alarm time delay is
programmable from 0 to 99 Seconds to prevent false shutdowns. The unit
is mounted in a Explosion Proof Enclosure and is rated Class 1 Division
1 BCD. Mounting is by the three (3) 5/16” Lugs provided.
For Latching Alarms a reset switch on the front panel
keypad is provided. An Optional external switch is available. Terminals
are also available for wiring to a remote reset switch.