Product Catalog

Index

CMCP-1100 Low Cost, Low Profile, Industrial Accelerometer

Standard version of our popular industrial accelerometer

CMCP-1100HT High Temperature, Industrial Accelerometer

High-Temperature version of our popular industrial accelerometer

CMCP-1100S Low Cost, Side Exit, Industrial Accelerometer

Side-Exit version of our popular industrial accelerometer

CMCP-1200 Low Cost Industrial Accelerometer

Standard MIL Spec C-5015 2-Pin Connector

CMCP-420VT 4-20 mA Vibration Transmitter

Loop powered vibration transmitter in terms of overall velocity

CMCP-420VT-T Dual Parameter  4-20 mA Vibration and Temperature Transmitter

Loop powered vibration and temperature transmitter

SKF Condition Monitoring Eddy Probes

Non-contact sensors for measuring relative vibration and position

CMCP-200 Accelerometer Mounting Pads

For epoxy mounting to machine - 1/4"-28 threaded hole

CMCP-203 Pipe Thread Accelerometer Mounting Adaptor

Converts 1/4"-28 accelerometers to 1/4", 3/8", 1/2" or 3/4" NPT

CMCP-205 Accelerometer Motor Fin Mounts

Painless solution for mounting accelerometers on cooling fins

CMCP-210 Acrylic Adhesive Bypacs

For mounting accelerometer mounting pads to the machine

CMCP-212 Silicone Dielectric

For proper accelerometer mounting

CMCP-220 Accelerometer Adhesive Mount Kits

Everything needed to mount multiple accelerometers

CMCP-230 Accelerometer Mounting Studs

Various studs to fit any accelerometer

CMCP-250 Accelerometer Mounting Kit

Mounting Pad and Motor Fin Mount + Accessories

CMCP-270 Ceramic Wire Nuts

Non-degradable solution for splicing field wiring

CMCP-271 Tefzel Tie Wraps

High temperature rating and durable

CMCP-701 Piloted Spot Reamer

Disposable low cost tool for facing machines for accelerometer mounting

CMCP-710 Indexable Counterbore Kit

Replaceable cutting blades for multiple uses

CMCP-280 Explosion Proof Accelerometer Housing

Accelerometer housing to meet API-670 standards

CMCP-602L Standard 2-Pin Accelerometer Extension Cables

For all accelerometers that use a 2 Pin MIL Spec 5015 Connector

CMCP-603L Standard 3-Pin Accelerometer Extension Cables

For all accelerometers that use a 3 Pin MIL Spec 5015 Connector

CMCP-602H High Temp. 2-Pin Accelerometer Extension Cables

For all accelerometers that use a 2 Pin MIL Spec 5015 Connector

CMCP-603H High Temp. 3-Pin Accelerometer Extension Cables

For all accelerometers that use a 3 Pin MIL Spec 5015 Connector

CMCP-604 Low Cost 2 Pin Accelerometer Extension Cables

For all accelerometers that use a 2 Pin MIL Spec 5015 Connector

CMCP-625 Accelerometer 5015 Connector to BNC Adapter

Adapts 2-Pin 5015 accelerometers to female BNC for use with BNC cables

CMCP-630 A/B Switch for Microlog

Two channel adapter (BNC to 25-Pin) for the SKF Microlog

CMCP-660 BNC to BNC Extension Cables

Color coded for Horizontal, Vertical and Phase measurements

CMCP-400 Series Instrument Wire

Full selection of instrument wire for all of your installation needs

CMCP-665 BNC to Fisher Cable for SKF CMXA50

For accelerometer or phase inputs into the SKF CMXA50 data collector

SKF Condition Monitoring Eddy Probes

Non-contact sensors for measuring relative vibration and position

CMCP-610 Bench-top Eddy Probe System Static Calibrator

For calibration and calibrating the curve of eddy probe systems

CMCP-801 Relative Eddy Probe Holder

For through case mounting of eddy probes - 12" max. insertion depth

CMCP-805 Aluminum Eddy Probe Mounting Bracket

For mounting 3/8"-24 and 1/4"-28 UNF Eddy Probes

CMCP-4190 Eddy Probe Mounting Adapters

For converting 3/8"-24 and 1/4"-28 UNF Eddy Probes to 1/2" or 3/4" NPT

CMCP-140 and CMCP-150 Proximity Probe Driver Enclosures

NEMA 4 painted steel and NEMA 4X stainless steel enclosure with DIN rail for mounting eddy probe drivers

CMCP-260 NEMA 4 and 4X Junction Boxes / Enclosures

NEMA 4X fiberglass and stainless steel and NEMA 4 painted steel enclosures with back plate

CMCP-265 Intermediate Termination Boxes

NEMA 4X fiberglass and stainless steel and NEMA 4 painted steel enclosures with terminal blocks

CMCP-261 Liquid Tight Strain Relief Connectors

Weather proof glands for cable entry into enclosures

CMCP-300 Series BNC Junction Boxes

For terminating the outputs of accelerometers or other transducer field wiring, they provide convenient access to the vibration signal by a portable data collector or analyzer.

CMCP-310 Series BNC Switch Boxes

For terminating and switching the outputs of up to 48 accelerometers.

CMCP-420VT 4-20 mA Vibration Transmitter

Loop powered vibration transmitter in terms of overall velocity

CMCP-500 Series Low Cost Transmitters

4-20 mA transmitters designed for a multitude of sensors. Standard models are available for all vibration transducers, temperature, process, and other parameters.

CMCP-500A Series Low Cost Monitors

Complete single channel monitoring systems designed for a multitude of sensors. Standard models are available for all vibration transducers, temperature, process, and other parameters.

CMCP-500 Integrated Systems and Sample Enclosures

Let STI's experienced engineers help design a condition monitoring system for your critical machinery

CMCP-5301 One Channel Monitoring System

Designed for use on typical rotating machinery such as motors, pumps fans, turbines, compressors, chillers., etc.

CMCP-5302 Two Channel Monitoring System

Designed for use on typical rotating machinery such as motors, pumps fans, turbines, compressors, chillers., etc.

CMCP-5304 Four Channel Monitoring System

Designed for use on typical rotating machinery such as motors, pumps fans, turbines, compressors, chillers., etc.

CMCP-5019 19" Rack-Mounted 10 Channel Retrofit Monitor

Designed for direct and simple replacement of antiquated rack mounted monitoring systems.

CMCP-5000 HMI Based Monitoring Systems

Allows a plant operator to view vibration and machine condition data in the control room for comparison with other operating parameters as well as historical data.

CMCP-1000 Single Channel Vibration Monitor

Single channel Vibration Monitor with an integral accelerometer packaged in an explosion-proof housing that is suitable for NEC Division I areas.

CMCP-1000C Single Channel Vibration Monitor (Large Enclosure)  Single Channel Vibration Monitor with an integral accelerometer packaged in an explosion-proof housing that is suitable for NEC Division I areas.  (Large Enclosure)

WonderWare HMI System Integration

Offers the ability to design custom Machine Mimics, which are visual interpretations of the machines, displaying the status of each data point or alarm.  Wonderware  HMI software includes easily programmable alarms in overall, rate of change, or SPC.

CMCP-RM Series Analog to Digital Converters

Cost effective method of utilizing existing networks within a plant to cost effectively communicate via MODBUS with a PLC, DCS or HMI from any sensor or transmitter with a 4-20 mA output.

CMCP-420AD8 Eight Channel Digital Transmitter System

Packaged A/D converter available with MODBUS RTU communications. The unit will accept the 4-20 mA signals from up to eight sensors with a 4-20 mA output.

CMCP-OS2400 Industrial Radios

Designed to operate in high-interference environments, the radios combines advanced frequency hopping and digital signal processing technology with outstanding receiver sensitivity and antenna diversity resulting in exceptional noise and interference rejection.

CMCP-510 Digital Displays for CMCP-500 Series Transmitters

Large, easy to read LED displays

CMCP-505 Digital Displays for CMCP-500A Series Monitors

Large, easy to read LED displays

CMCP-515 Universal 24 VDC Power Supplies

24 VDC linear regulated DC power supply suitable for use with the CMCP-500 Series transmitters and monitors as well as -24 VDC eddy probe systems.

CMCP-LVDT-AC Linear Variable Differential Transformer
(High Temp)

For Case Expansion measurements in turbine supervisory instrumentation. Range of 0-2 inches, 4-20mA Output

CMCP-LVDT-51A (DC)  Linear Variable Differential Transformer

For Case Expansion measurements in turbine supervisory instrumentation. Range of 0-2 inches, output of 0-5 VDC, or 2.5 mV/mil

CMCP-VALVE Rotary Potentiometer Valve Position Sensor

Attached to the end of the valve control shaft, the Valve Position Transducer provides a voltage proportional to the valve’s position

CMCP-600 Bearing Fault Demonstrator

Includes two bearings, a perfect bearing, and one with a flaw, which are easily and quickly exchanged for demonstration of bearing fault signals

CMCP-601 Machinery Diagnostic Demonstration Rotor Kits

Allows the variation of such parameters as balance, shaft bow, and alignment

CMCP-TACH3 Programmable Panel Mount Tachometer

Features a range up to 999,999 RPM, is adjustable for multiple inputs per revolution, accepts almost any input, and has adjustable alarms

CMCP-TACH3-XP Explosion Proof Tachometer

Same features as our CMCP-TACH3 in an explosion proof enclosure

CMCP-575 Speed Transmitter

4-20 mA output scaled to a user defined range

CMCP-P5-11 Speed Sensor

Proximity speed pickup for the CMCP-TACH3 tachometers

CMCP-3070A Intrinsically Safe Speed Sensor

Class I Rated Magnetic Speed Pickup For Use In Hazardous Areas

CMCP-240 Proximity Switch

Proximity switch for the CMCP-575 speed transmitter

CMCP-1210 Spring Loaded RTD & Thermocouple Probe

Spring loaded for accurate measurement of bearing temperatures

CMCP-800 Microlog Field Balancing Accessory Kit

Contains all of the accessories necessary to perform in-place field balancing of rotating machinery with the SKF Microlog

CMCP-850 CMXA50 Field Balancing Accessory Kit

Contains all of the accessories necessary to perform in-place field balancing of rotating machinery with the SKF CMXA50

CMCP-811 Balance Weight Starter Kit

Assortment of balancing weights and is conveniently packaged as a starter kit: Contains Squirrel Cage and C-Clamp Balancing Weights

CMCP-810 Runout Measurement Kit

Detects electrical and mechanical runout present on a shaft from Surface irregularities, Electrical Runout, Residual Magnetism, and Residual Stress Concentrations

CMCP-875 Microlog Current Clamp Kit

Perform current analysis with a SKF Microlog

CMCP Custom Cabinets & Panels

Sales Technology Inc. has a fully equipped shop to design, assemble, integrate and test custom cabinets for your application. Over 100 cabinets have been completed for various customers including Aramco, Amoco, BHEL, Brown and Root, Caltex, Chevron and Wyle Labs.