Navigate to the STI Vibration Monitoring Inc. homepage

You are here:Home > Temperature
Spring Loaded Temperature Sensor
Spring Loaded Temperature Sensor - Image 1 of 0
Spring Loaded Temperature Sensor - Image 2 of 0
Spring Loaded Temperature Sensor - Image 1 of 0
Spring Loaded Temperature Sensor - Image 2 of 0
Spring Loaded Temperature Sensor - Image 1 of 0
Spring Loaded Temperature Sensor - Image 2 of 0

CMCP1210 Spring Loaded Tip Sensitive Bearing Temperature Sensors

STI
$0.00
CMCP1210 RTD Data Sheet
Choose your options:
CMCP1210 Sensor Type
CMCP1210 Sensor Type:
CMCP1210 Connection Head
CMCP1210 Connection Head:
Product Code: CMCP1210
The CMCP1210 series bearing temperature sensor provides fast and accurate readings from bearings, blocks and other solids. The spring-loaded holder ensures solid contact in drilled holes with a built-in oil seal. The CMCP1210 is shipped with a standard 8.4" sensing probe which features a copper alloy tip for quick response to temperature changes. Probes may be cut to length in the field using a tube cutter. Additional sizes are available on request.


Documents Available:

CMCP1210 RTD Data Sheet
Specifications:

Temperature range:

-50º to 260º C (-58º to 500º F)

Material:


Probe:

SS with Copper Alloy Tip

Holder:

Stainless Steel with Viton O-ring

Head:

Aluminum or Stainless Steel

Pressure rating:

50 psi (3.4 bar)

Insulation resistance:

10 megohms min. at 100 Vdc, leads to case. Ungrounded junctions only on thermocouples.

Connection:

Terminal block for wires to 14 AWG

Conduit thread:

1/2” NPT

Bearing entry:

1/2” NPT (For 3/4” NPT, use optional CMCP-1211 Adapter. Add 1” to length for adapter.)

Time constant:

Typical value in moving water:

2.0 seconds

Standard Version:

Temperature Probe

RTDThermocouple

Probe Diameter:

0.250"

Temperature range:

-50 to 260°C (-58 to 500°F).

Case:

Stainless steel with copper alloy tip.

Time constant:

2.0 seconds typical in moving water.
3.0 seconds for dual element models.

Pressure rating:

100 psi (6.9 bar).

Insulation resistance:

Single element probes: 1000 megohms min. at 500 VDC, leads to case.

Dual element probes: 100 megohms min. at 100 VDC, between elements and leads to case.

Vibration:

Withstands 10 to 2000 Hz at 20 G’s min.

Shock:

Withstands 100 G’s min. sine wave shock of 8 milliseconds duration.

Probe Diameter:

0.250"

Temperature range:

-184 to 260°C (-300 to 500°F).

Case:

Stainless steel with copper alloy tip. On special order.

Time constant:

Typical value in moving water:

Grounded junction: 1.5 seconds.
Ungrounded junction: 7 seconds.

Pressure rating: 100 psi (6.9 bar).

Insulation resistance: 10 megohms min. at 100 VDC, leads to case, ungrounded junctions only.

Vibration:

Withstands 10 to 2000 Hz at 20 G’s min.

Shock:

Withstands 100 G’s min. sine wave shock of 8 milliseconds duration.

Spring Loaded Probe Holder

Spring-loaded holders provide a quick and simple installation of probe sensors — pull out and twist the knob, insert the probe until it bottoms out, and release the knob. Spring pressure holds the probe tip in contact with the measuring surface for faster response and more reliable measurements. Features a rubber O-ring that doesn’t crimp the probe but prevents oil leakage to 50 psi (3.4 bar) at up to 260°C.

Body material:

300 series stainless steel

Temperature range:

-40 to 260°C (-40 to 500°F)

Thread (Conduit Head):

3/4 - 14 NPT

Thread (Case Mount):

1/2 - 14 NPT

Hex size:

1 1/8" (29 mm)

Conduit Head

Body/gasket material:

Aluminum/silicone gasket

IP/NEMA Rating:

IP55 Type 3 and 4

Max. Temp.:

316°C (600°F)

Dimensions:

H - 3.5 (89)

L - 3.5 (89)

D - 2.0 (51)

T - 1.75 (44)

Accessories

NPT Adapter 1/2" to 3/4"
$35.00
NPT Adapter 1/2" to 3/4"
$35.00
NPT Adapter 1/2" to 3/4"
$35.00

Get access to the latest deals and more!