STI Vibration Monitoring, Inc. Vibration Monitoring & Machine Protection Systems
1010 East Main Street, League City, TX 77573
www.stiweb.com / www.stiwebstore.com
Tel 281.334.0766   
Toll Free 888.877.7213   
Fax 281.334.4255   
Sensors - Vibration Monitors - Vibration Transmitters - Protection Systems - Junction Boxes - BNC Switch Boxes - Sensor Cables - Mounting Hardware - Rotor Kits - Balancing Kits

Products

Follow us on FacebookFollow us on TwitterSTI Vibration Monitoring YouTube

2 Wire Loop Powered Vibration Transmitters

Field Application Note: Differential Expansion TSI
CMCP420VT Loop Powered Vibration Transmitter
STI's CMCP420VT Series Vibration Transmitters are available as either single parameter (velocity) or dual parameter (velocity and temperature). They are loop powered 2-wire transmitters and can be powered by the PLC or DCS system. The are approved for Class 1 Division 2 installations by CSA and UL. They may be installed in a Class 1 Division 1 environments by using a appropriately rated XP Conduit Head. They are fully potted in a 316 Stainless Steel Case. A raw 100 mv/g dynamic buffered signal is available on single parameter units for connection to portable analyzers or data collectors.

CMCP420VT Loop-Powered Vibration Transmitter CMCP420VT Loop-Powered Vibration Transmitter
The CMCP420VT is a solid state, loop powered vibration transmitter. It provides a 4-20 mA output that is proportional to overall vibration in terms of velocity. The CMCP420VT continuously monitors machinery health and transmits directly into a PLC or DCS for trending, alarm and machine shutdown.
CMCP420VT Loop-Powered Vibration Transmitter

CMCP420VT-T Dual Parameter Loop-Powered Vibration and Temperature Transmitter
The CMCP420VT-T is a solid state, loop powered vibration and temperature transmitter. It provides two (2) 4-20 mA output that are proportional to overall vibration in terms of velocity and temperature.

CMCP422VT Series Loop Powered Transmitter

CMCP422VT Series Loop Powered Transmitter
The CMCP422VT Series are Loop Powered Vibration Velocity Sensors with a MS 2 Pin 5015 Connector that provide a 4-20mA output that is proportional to the overall vibration in terms of velocity.

CMCP422AT Loop Powered Vibration Acceleration Transmitter CMCP422AT Loop Powered Vibration Acceleration Transmitter (4-20mA)
The CMCP422AT Series are Loop Powered Vibration Acceleration Sensors with a MS 2 Pin 5015 Connector that provide a 4-20mA output that is proportional to the overall vibration in terms of acceleration.
CMCP420AD8 Analog to Digital Converters

CMCP420AD8 Analog to Digital Converters are a cost effective method of utilizing existing networks within a plant to cost effectively communicate via MODBUS or Ethernet TCP/IP with a PLC or DCS from any sensor or transmitter with a 4-20 mA output.

CMCP420LED Display CMCP420LED Display
The display for the CMCP420VTLED is loop powered display that shows the actual vibration levels in velocity on an easy to read LCD or LED display.
CMCP420EL 90 Degree 3/4" x 3/4" NPT Elbow for CMCP420VT

CMCP420EL 90 Degree 3/4" x 3/4" NPT Elbow for CMCP420VT
Useful for connecting CMCP420VT to hard or flexible conduit. When used with the CMCP420-WF, provides a simple weatherproof exit for the instrument wire.

CMCP420BNC BNC Adapter for CMCP420VT

CMCP420BNC BNC Adapter for CMCP420VT
90 Degree 3/4” NPT conduit elbow with a BNC connector to access the raw acceleration signal. This is useful for connection to portable data collectors.

CMCP420WF 3/4" NPT Weatherproof Cable Fitting for CMCP-420VT
CMCP420WF 3/4" NPT Weatherproof Cable Fitting for CMCP420VT
The CMCP420WF Waterproof Cable Fitting when used with the CMCP420LED, CMCP420BNC or CMCP420EL provides a waterproof instrument wire exit.
CMCP420XPHD Explosion Proof Head for CMCP420VT CMCP420XPHD Explosion Proof Head for CMCP420VT
Explosion Proof Head for CMCP420VT Loop Powered Transmitter. The CMCP420VT Transmitter equipped with the CMCP420XP Explosion Proof Head will make it rated for Class I Division I areas.
CMCP203 NPT Pipe Thread Accelerometer Mounting Adapter
CMCP203 NPT Pipe Thread Accelerometer Mounting Adapter
Make use of existing plugged holes on your machine for accelerometer mounting.
Copyright © 2014 STI Vibration Monitoring Inc. All Rights Reserved.