CMCP797 Active Buffer Module

• • Low Cost
• • Provides Terminations
• • Finished Complete Look
• • BNC Output for Analyzers
• • Selectable Resistance Buffers
• • CCD for Accelerometers
• • Handles Most Sensors
• • Up to 4 Buffered Outputs
• • Selectable Bias Voltage Block
• • Approved

Description:

The CMCP797 Active Signal Buffer with a Single Input and four (4) Active Buffered Outputs accepts either a Accelerometer Input or Eddy (Proximity) Probe Input. It is powered with either +24 VDC for Accelerometers or -24 VDC for Eddy (Proximity) Probes.  The CMCP797 has a jumper selectable CCD (Constant Current Diode) if powering of the Accelerometers is required.  A front panel BNC connector is provided for portable data collectors and analyzers and is shared with Channel 4.

Accuracy:  .1% Basic DC and AC

Input:  Single +24VDC ICP Accelerometer (4mA constant current power provided) or -24VDC powered Proximity Systems

Output: Four (4) Active Buffered Outputs, Front Panel BNC Connector, Green Power "On" LED

Power:  +24VDC for ICP Type Sensors, -24VDC for Proximity Systems, Connections via Front Terminal or DIN Rail Tbus Connection

Mounting:  DIN Rail (35mm) Standard Dimensions: 3.9" High x 0.89" Wide x 4.18" Deep (99 x 22.5 x 106mm)