|
 |
In high frequency accelerometer applications, it is recommended by
the manufacturer to apply a thin coating of Silicone Dielectric between the
accelerometer and the mounting surface before mounting the accelerometer to the proper
torque. The dielectric helps insure the transmittal of high frequency vibration across the
mounting interface. When an accelerometer is installed in harsh or moist environments,
Silicone Dielectric is also recommended for additional sealing of the accelerometer's
connector. Each one (1) ounce tube of Silicone Dielectric will install
approximately 50 to 100 accelerometers. When also used as a connector sealant, each tube
will install approximately 15 to 25 accelerometers. |
