CMCP400 Series Instrument Wire

Instrument wire is provided by STI Vibration Monitoring Inc. as a service to our customers. These wires are used in various field wiring installation applications for permanent vibration monitoring systems. All instrument cables have been carefully reviewed and selected to insure that they meet the proper industry specifications and STI applications requirements. The most common types are available from STI stock. Large orders and those cables with lower usage will be dropped shipped directly to the customer from our distributor.

High Temperature Bare Copper Pair Instrument Wire:

Recommended for Paper Machine Applications CMCP400-XXXX is a 392° F (200° C) high temperature Teflon jacketed and insulated, 20 AWG bare copper wire, twisted pair instrument cable, with an overall braided shield. For the multiconductor cables, each pair is color coded, individually shielded, and provided with a rip cord for jacket removal.

CMCP400	High Temp. Bare Copper Pair Instrument Wire
	Only Available in 1,000 Foot Rolls +/- 10%

Standard Instrument Cable:

Standard instrument cable is 221° F (105° C) temperature rated, PVC insulated and jacketed, twisted bare copper wire, and 100% coverage foil shielded with drain wire. These standard instrument cables are designed to be installed in conduit or wire-ways with a sunlight resistant outer jacket. Long installation lengths over 250 feet (63.5 m) should use 18 AWG wire to reduce frequency attenuation. Twisted Shielded Pair cable can be used for recorder outputs, 2-wire accelerometers, relay output connections, and some system connections. Twisted shielded triad cables are used for all proximity transducer systems, 3-wire accelerometers with temperature measurement, and RTD temperature sensors.

CMCP410	-XX	-XXXX	20 AWG Pair
	-01		1-Pair (0.210" Dia.)
	-02		2-Pairs (0.370" Dia.)
	-04		4-Pairs (0.420" Dia.)
	-08		8-Pairs (0.510" Dia.)
	-12		12-Pairs (0.630" Dia.)
	-16		16-Pairs (0.700" Dia.)
	-24		24-Pairs (0.850" Dia.)
		-XXXX	Length in Feet (2,500 ft max per roll)

CMCP415	-XX	-XXXX	18 AWG Pair
	-01		1-Pair (0.230" Dia.)
	-02		2-Pair (0.430" Dia.)
	-04		4-Pair (0.470" Dia.)
	-08		8-Pair (0.560" Dia.)
	-12		12-Pair (0.700" Dia.)
	-24		24-Pair (0.970" Dia.)
		-XXXX	Length in Feet (2,500 ft max per roll)

CMCP420	-XX	-XXXX	20 AWG Triad
	-01		1 Triad (0.220" Dia.)
	-04		4 Triad (0.480" Dia.)
	-08		8 Triad (0.560" Dia.)
	-12		12 Triad (0.700" Dia.)
		-XXXX	Length in Feet (2,500 ft max per roll)

CMCP425	-XX	-XXXX	18 AWG Triad
	-01		1 Triad (0.240" Dia.)
	-04		4 Triad (0.530" Dia.)
	-08		8 Triad (0.650" Dia.)
		-XXXX	Length in Feet (2,500 ft max per roll)

LAN Interconnect Cable:

CMCP450 is 24 AWG Polyethylene insulated wire, twisted pair, with both a 100% foil coverage and a 86% coverage tinned braid shielded cable. The nominal capacitance of this cable is 15.5 pF/ft (100 Ohm).

CMCP450	-XXXX	LAN Interconnect Cable0.33" OD (0.84 cm)
	-XXXX	Length in Feet (2,500 ft max per roll)