Condition Monitoring & Custom Products

        Vibration Monitoring and Machine Protection Systems

        League City Texas     Phone: 800-845-3028 or 281-334-0766     Fax: 281-334-4255

Home

Products

Datasheets

Manuals

About STI

Find a Rep

Application Notes

Technical Notes

Features:

• Two Levels of Alarm with Relays

• True "OK" Circuitry with Relay

• Adjustable Time Delays

• Trip Multiply

• 4-20 mA Output

• Buffered Transducer Output

• Reset Button

• Bright LED Digital; Readout

The CMCP-5304 is a four channel Vibration Monitor that has been designed for use on typical rotating machinery such as motors, pumps fans, turbines, compressors, chillers., etc. The CMCP-5304 accepts inputs from any industry standard 100 mV/g accelerometer, condition’s the input signals to velocity and provides a digital display and alarm status indication.

Analog outputs (4-20 mA) are provided for each channel for interface to a PLC or DCS for trending, alarm and operator interface. The CMCP-5304 alarm contacts for the OK circuit, and Alert and Danger may be interfaced to machine control and shutdown systems for a complete vibration protection solution.

The system is a pre-wired turn-key package with panduit, power supply, bright LED display, channel selector switch and reset button. The power supply accepts 110 or 220 VAC, 50 or 60 Hz. The CMCP-5304 is available in either an English or Metric configuration. The standard housing is polyester powder coated steel; rated NEMA 12. An optional Stainless Steel enclosure is rated NEMA 4X.

Electrical

Power:

Accepts 110 VAC or 220 VAC, 60 or 50 Hz

Frequency Response:

(-3 dB) 2 Hz to 20 kHz

Buffered Output:

BNC Connector 0-20 kHz

Accuracy:

5.0% of Full Scale Range

Output:

4-20 mA proportional to the full scale range

Relay output for Alert and Danger alarms

Maximum Load:

600 Ohms Resistive per channel

Case:

Isolated

Environmental

Operating Temp.:

-20^oC to +80^oC (-4^oF to +176^oF)

Storage Temp.:

-55^oC to +125^oC (-67^oF to +257^oF)

Relative Humidity:

0 - 95% Non-Condensing

Approvals:

NEMA 12, EEMAC, UL508, CSA Type 4, VDE IP66, IEC 529, IP66

Physical

Dimensions:

200 mm H x 400 mm W x 150 mm D

(7.87” H x 15.75” W x 5.90” D)

Weight:

6.80 Kg (15 lbs)

CMCP-5304

-X

4 Channel General Machine Monitor

-E

English 0-1.0 in/sec

-M

Metric 0-25.4 mm/sec

CMCP-5304SS

NEMA 4X Stainless Steel Enclosure

CMCP-5304KEY

Wing Knob Latch With Key

CMCP-5304FOOT

Foot Mounting Kit