CMCP200 Accelerometer Mounting Pads

• 316 Stainless Steel
• 1" Diameter (2.54 cm)
• 1/4" or 3/8" Thick (6.4/9.5mm)
• Lip Around Base for Adhesive to Hold
• 1/4"x28UNF Tapped Hole

STI's CMCP200 Series Accelerometer Mounting Pads are used for glue (epoxy) mounting accelerometers to a prepared surface. Mounting pads are made from 316 stainless steel and are 1" (2.54 cm) in diameter and either 1/4" (0.64 cm) or 3/8" (0.95 cm) thick. The pads are lapped on one side to provide an ideal surface for accelerometer mounting. The pads are also provided with a 1/4" x 28 UNF tapped thru-hole for accelerometer mounting. The 1/4" thick version is recommended for low clearance installations or when using the combination epoxy and stud mounting method. The 3/8" thick version is recommended for installing side exit accelerometers.

CMCP200-01 (1/4" Thick)
CMCP200-02 (3/8" Thick)