Typical Applications Fans, Motors, Pumps, Compressors, Centrifuges, Conveyors, Air Handlers, Gearboxes, Rolls, Dryers, Presses, Cooling, HVAC, Spindles, Machine Tooling, Process Equipment and many more.
Loop Powered
Acceleration (g's) Output (10 Hz to 5.0 kHz)
RMS or Peak Detection
Top Entry, 2 Pin MS Connector or 4 Pin M12 Eurofast
Class 1 Division 2 Approved
Class 1 Division 1 with Barrier
Interfaces Directly to PLC/DCS Systems
-13 to +248 °F (-25 to +120 °C) Temperature Range
1/4" x 28 UNF Mounting Stud Included
The CMCP422AT-C Series are loop powered 4-20mA output sensors which are capable of interfacing directly to an analog input card on a PLC or DCS system. The 4-20mA output is proportional to the full scale range in terms of g's Acceleration and are capable of transmitting signals over a long distance without signal loss. The MS connector option allows the sensor to work with a separate cable assembly such as the CMCP602 series cables.
