Navigate to the STI Vibration Monitoring Inc. homepage

Side Exit General Purpose Accelerometer

CMCP785A Side Exit 2 Pin MS Connector

$0.00
Choose your options:
Thread Size
Thread Size:
Product Code: CMCP785A
Features
  • General Purpose Side Entry Accelerometer
  • 100 mV/g ±10% Sensitivity
  • 284°F (140°C) Maximum Temperature
  • ±80 g Dynamic Range
  • 2 Pin MS 5015 Connector or choice of M12 Connector or Integral Cable
  • Class 1 Division 2 Approved
  • Class 1 Division 1 Approved with IS Barrier or Isolator
  • ¼”-28 UNF or M8x1.25 Captive Mounting Bolt
  • Sealed to IP68
  • Lifetime Warranty

The CMCP785A Side Exit General Purpose Accelerometer
is the most common choice when it comes to monitoring different types of rotating equipment. The CMCP785A's side exit requires less clearance and accommodates a flush installation. The sensor is lightweight and can be use for route based or permanent mount applications. The sensor is designed so that cross wiring will not harm the internal components and provides protection against ground loops. The CMCP785A is waterproof and can be hosed down or submersed when using the proper extension cable such as the CMCP602 series. Additional sensitivities such as 10 mV/g, 30 mV/g, 50 mV/g, 250 mV/g and 500 mV/g are also available in the same sensor package and can be ordered by adding the sensitivity after the base part number. Contact STI for more details.

CMCP785A DatasheetDrawingSGS CertificateInstallation GuideManualSupport

Get access to the latest deals and more!