Navigate to the STI Vibration Monitoring Inc. homepage

You are here:Home > Buffer Modules
CMCP797 Active Signal Buffer

CMCP797 Active Buffer Module

STI
$0.00
CMCP797 Buffer Module Data Sheet
Product Code: CMCP797
  • 4 Active Buffer Outputs w/Single Input
  • Accelerometer or Proximity Probe Signal
  • Powered by +24 or –24 VDC
  • Accelerometer Power with CCD
  • DC Coupled (Bias/Gap on Outputs)
  • Power “On” LED
  • Din Rail Mounted
  • Front Terminal or TBus® Power Wiring
  • Universal Input (Accels or Proximity)

The CMCP797 Active Signal Buffer with a Single Input and four (4) Active Buffered Outputs accepts either a Accelerometer Input or Eddy (Proximity) Probe Input.It is powered with either +24 VDC for Accelerometers or –24 VDC for Eddy (Proximity) Probes.The CMCP797 has a jumper selectable CCD (Constant Current Diode) if powering of the Accelerometers is required. A front panel BNC connector is provided for portable data collectors and analyzers and is shared with the Channel 4 terminal output.

CMCP797 Buffer Module Data SheetCMCP797 Buffer Module Manual

Accuracy: .1% Basic DC and AC
Input: Single +24VDC ICP Accelerometer (4mA constant current power provided) or -24VDC powered Proximity Systems
Output: Four (4) Active Buffered Outputs, Front Panel BNC Connector, Green Power "On" LED
Power: +24VDC for ICP Type Sensors, -24VDC for Proximity Systems, Connections via Front Terminal or DIN Rail Tbus Connection
Mounting: DIN Rail (35mm) Standard
Dimensions: 3.9" High x 0.89" Wide x 4.18" Deep (99 x 22.5 x 106mm)

Get access to the latest deals and more!