Home > Transmitters and Monitors > 4-20 mA Sensors >

CMCP422ATS-I Series Loop Powered Acceleration (g's) Transmitter, Side Entry Integral Armored Cable (IP65)
Side Exit MS 2 Pin 5015 Connenctor Transmitter


 
CMCP422ATS-C Data Sheet
US MSRP: $275.00

Availability:: Usually Ships in 24 to 48 Hours
Product Code: CMCP422ATS-I

422 Series Range


Signal Detection



Description Technical Specs
 
Typical Applications
Fans, Motors, Pumps, Compressors, Centrifuges, Conveyors, Air Handlers, Gearboxes, Rolls, Dryers, Presses, Cooling, HVAC, Spindles, Machine Tooling, Process Equipment and many more.


  • Loop Powered
  • Acceleration Output (ISO 10-5kHz)
  • RMS or Peak Detection
  • Side Entry, Integral Armored Cable (IP65)
  • Class 1 Division 2 Approved
  • Class 1 Division 1 with Barrier
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +194F (-25 to 90C) Temperature Range
  • 1/4" x 28 UNF Captive Bolt
The CMCP422ATS-I Series are loop powered 4-20mA output sensors which are capable of interfacing directly to an analog input card on a PLC or DCS system. The 4-20mA output is proportional to the full scale range in terms of Acceleration (g's) and are capable of transmitting signals over a long distance without signal loss. The integral cable features a ETFE cable with a stainless steel overbraided armor.

CMCP422ATS-I Data Sheet


Accessories for this product...
CMCP602L Series 2 Socket MS Connector with Locking Collar (IP67)
US MSRP: $54.00

Add
Accelerometer Extension Cable
CMCP203 NPT Pipe Thread Accelerometer Mounting Adapter
US MSRP: $20.00

Add
NPT Accelerometer Mounting Adapters
CMCP205 Accelerometer Motor Fin Mounts
US MSRP: $19.00

Add
Motor Fin Mounts for Accelerometers
CMCP200 Accelerometer Mounting Pads
US MSRP: $6.00

Add
Accelerometer Mounting Discs
CMCP210 Acrylic Adhesive Bypacs For Accelerometer Mounting
US MSRP: $12.00

Add
Acrylic Adhesive for Accelerometer Mounting


Browse for more products in the same category as this item:

Transmitters and Monitors > 4-20 mA Sensors
Accelerometers > 4-20mA Output Sensors > Acceleration Output (g's)