Home > Transmitters and Monitors > 4-20 mA Sensors >

CMCP422VT Series Loop Powered Velocity Transmitter (4-20mA)
Top Exit MS 2 Pin 5015 Conenctor Transmitter

Alternative Views:

CMCP422VT Data Sheet
US MSRP: $240.00

Availability:: Usually Ships in 24 to 48 Hours
Product Code: CMCP422VT

422 Series Range

Connection Type

Signal Detection

Add Mounting Pad?

Description Technical Specs
Typical Applications
Fans, Motors, Pumps, Compressors, Centrifuges, Conveyors, Air Handlers, Gearboxes, Rolls, Dryers, Presses, Cooling, HVAC, Spindles, Machine Tooling, Process Equipment and many more.

  • Low Cost
  • Vibration Velocity RMS or Peak Detection
  • Top Exit 2 Pin Mil-Spec 5015 Connector
  • Optional 5 Meter Armored Integral Cable
  • Rugged Design
  • Loop Powered 4-20 mA
  • Interfaces Directly to PLC/DCS Systems
  • Two Ranges Available
  • Operating Temperature Range: -13 to +194 degrees F (-25 to 90 degrees C)
  • 1/4" x 28 UNF Mounting Stud
  • Optional Armored Integral Cable

The CMCP422VT Series are Loop Powered Vibration Velocity Sensors with a MS 2 Pin 5015 Connector or and optional 5 meter armored integral cable that provide a 4-20mA output that is proportional to the overall vibration in terms of velocity. The CMCP422VT Series continuously monitors machinery health and and transmits directly to a PLC or DCS system for alarming, trending and machine shutdown. The CMCP422VT is available with two different ranges to meet your machines requirements. STI's CMCP602 Series Cables mate to the MS 5015 connector on the CMCP422VT Series.

Available in 3 Connector Options

2 Pin Connector
4 Pin M12 Connector
Integral Cable
CMCP422VT Data Sheet CMCP422VT-M12 Data Sheet CMCP422VT-I Data Sheet

Accessories for this product...
CMCP602L General Purpose TEP 2-Pin Accelerometer Cables
US MSRP: $54.00

Accelerometer Extension Cable
CMCP205 Accelerometer Motor Fin Mounts
US MSRP: $19.00

Motor Fin Mounts for Accelerometers
CMCP203 NPT Pipe Thread Accelerometer Mounting Adapter
US MSRP: $20.00

NPT Accelerometer Mounting Adapters
CMCP200 Accelerometer Mounting Pads
US MSRP: $6.00

Accelerometer Mounting Discs
CMCP210 Acrylic Adhesive Bypacs For Accelerometer Mounting
US MSRP: $12.00

Acrylic Adhesive for Accelerometer Mounting

Browse for more products in the same category as this item:

Transmitters and Monitors > 4-20 mA Sensors