CMCP200 Accelerometer Mounting Pads

STI's Accelerometer Mounting Pads are used with glue (epoxy) to mount accelerometers on a prepared surface. Mounting pads are stainless steel and are 1" (2.54 cm) in diameter and either 1/4" (0.64 cm) or 3/8" (0.95 cm) thick.

The pads are lapped on one side to provide an ideal surface for accelerometer mounting. The pads are also built with a 1/4" x 28 UNF tapped hole for accelerometer mounting. The 1/4" thick version is recommended for low clearance installations or when using the combination epoxy and stud mounting method. The 3/8" thick version is recommended for installing ring mode accelerometers.

CMCP200 Series Accelerometer Mounting Pads are available in 306 Stainless Steel for Standard Mounting Pads and 416 Stainless Steel for Magnetic Mounting Pads.