Navigate to the STI Vibration Monitoring Inc. homepage

You are here: Home > 4-20mA Output Sensors > Acceleration Output (g's)
The loop powered 4-20 mA output sensors are designed to interface directly to an analog input card on a Control System (PLC or DCS). The 4-20 mA output is proportional to the full-scale range in terms of Acceleration and is capable of transmitting signals over a long distance without signal loss. The sensors are available with 2 Pin MS connector, M12 connector or with integral cable with or without armor.
Loop Powered 4-20 mA Output Sensors From STI Vibration Monitoring
Loop powered 4-20 mA output sensors utilize a loop circuit to power themselves, eliminating the need for an external power source. This not only reduces installation and maintenance costs, but also makes them perfect for remote and hazardous locations. With a 4-20 mA output signal, these sensors provide precise and reliable measurements, making them ideal for a wide range of applications in industries such as manufacturing and oil and gas. Say goodbye to complicated wiring and unreliable data, and say hello to dependable technology with loop powered 4-20 mA output sensors from STI Vibration Monitoring.
Click on the image below to view the product page.

Acceleration Output (g's)

    Top Exit MS 2 Pin 5015 ConnectorTransmitter
    • 4-20mA Output in Acceleration (g's)
    • RMS or Peak Detection
    • Top Entry, MS Connector
    • 10 Hz to 5 kHz Frequency Response
    • -25 to +120°C Operating Temperature
    • Two Wire Operation
    • Class 1 Division 1 and 2 Approved
    • Lifetime Warranty
    $240.00
    Top Exit MS PUR Submersible Accelerometer
    • 4-20mA Output in Acceleration (g's)
    • RMS or Peak Detection
    • Top Entry, IP68 Submersible Integral Cable
    • 10 Hz to 5 kHz Frequency Response
    • -25 to +120°C Operating Temperature
    • Two Wire Operation
    • Class 1 Division 1 and 2 Approved
    • Lifetime Warranty
    $240.00
    Side Exit MS 2 Pin 5015 Connenctor Transmitter
    • 4-20mA Output in Acceleration (g's)
    • RMS or Peak Detection
    • Side Exit, MS Connector
    • 10 Hz to 5 kHz Frequency Response
    • -25 to +120°C Operating Temperature
    • Two Wire Operation
    • Class 1 Division 1 and 2 Approved
    • Lifetime Warranty
    $275.00
    Side Exit Transmitter with Integral Braided Armored Cable
    • 4-20mA Output in Acceleration (g's)
    • RMS or Peak Detection
    • Side Entry, Integral Armored Cable
    • 10 Hz to 5 kHz Frequency Response
    • -25 to +120°C Operating Temperature
    • Two Wire Operation
    • Class 1 Division 1 and 2 Approved
    • Lifetime Warranty
    $275.00
    Submersible Vibration Transmitter
    • 4-20mA Output in Acceleration (g's)
    • RMS or Peak Detection
    • Side Entry, Submersible Cable
    • 10 Hz to 5 kHz Frequency Response
    • -25 to +120°C Operating Temperature
    • Two Wire Operation
    • Class 1 Division 1 and 2 Approved
    • Lifetime Warranty
    $275.00

Get access to the latest deals and more!