You are here: Home > Sensor Mounting > Adhesives (Epoxies)
Mounting of Accelerometers or Velocity Sensors using epoxy adhesives is easily accomplished using STIs complete line of Adhesives and Adhesive Accessories. Epoxy adhesive mounting of sensors is common in both the Pulp and Paper Industry, where drilling and tapping mounting holes may be impractical. A flat surface is first prepared using a CMCP270 End Mill or Counter Bore. A CMCP200 Series Mounting Pad (1 diameter x 1/4 Thick) is then mounted using adhesives to the prepared area on the bearing. The sensor is then mounted to the mounting pad using a standard mounting stud. In some cases a custom mounting block may be manufactured to exactly fit the curve or shape of the mounting surface.
Sort By:
1
Adhesive Filler for Motor Fin Mounts CMCP206 Adhesive Filler For Accelerometer Motor Fin Mounts - 50 ml

  • Anchors the fin mount between the motor cooling fins
  • Requires CMCP207 dispenser and CMCP208 mixing nozzles
  • For mounting CMCP205 motor fin accelerometer mounting adapters

US MSRP: $30.00
CMCP207 Adhesive Dispenser For CMCP206 & CMCP210C

  • For Mounting Accelerometer Mounting Pads and Motor Fin Mounts
  • Requires CMCP208 Mixing Nozzles
  • Reusable
  • 1:1 Dispenser for CMCP206 Adhesive Filler Cartridges
  • 4:1 Dispenser fro CMCP201C Acrylic Adhesive Cartridges

US MSRP: $75.00
CMCP208 Pack of 12 Mixing Nozzles for CMCP206, CMCP207

  • For Dispensing CMCP206
  • Requires CMCP207 Adhesive Dispenser

US MSRP: $25.00
Acrylic Adhesive for Accelerometer Mounting CMCP210 Acrylic Adhesive Bypacs For Accelerometer Mounting

  • For Mounting Accelerometers
  • Acrylic Adhesive
  • Bypac Packaged
  • Hands Off Mixing
  • -40F to 300F or
  • -40C to 149C
  • Mounts 2 Mounting Pads
  • MSDS Available
CMCP210 Acrylic Bypac Data Sheet

US MSRP: $12.00
Acrylic Adhesive for Accelerometer Mounting CMCP210C Acrylic Adhesive For Accelerometer Mounting

  • Acrylic Adhesive
  • 42 ml (1.42 oz.) Dispenser Package
  • 4:1 Mixing Ratio
  • Hands Off Mixing
  • -40F to 300F or
  • -40C to 149C
  • Mounts up to 15 Accelerometers
  • MSDS Available

CMCP210 Acrylic Bypac Data Sheet

US MSRP: $50.00
Epoxy for Accelerometer Mounting CMCP211 Depend 330 Adhesive and Activator For Accelerometer Mounting

  • For Mounting Accelerometers
  • Mounts 25-50 1" Mounting Pads
  • -60F to 250F or
  • -51C to 121C
  • 1 Minute Setup Time
  • MSDS Available
  • Ships by Ground

CMCP211 Depend 330 Download Datasheet

US MSRP: $65.00
De-greaser CMCP214 Loctite 20162 ODC Free Cleaner/De-greaser

  • Loctite 20162
  • De-Greaser
  • Cleans Mounting Surfaces
  • 16 oz. Spray
  • Dries Residue Free
  • Non-Ozone Depleting

US MSRP: $25.00
Accelerometer Mounting Kit CMCP220 Accelerometer Adhesive Mounting Pad Kits

  • Mounting Kit for
    10, 32, 64 or 128 Accelerometers
  • CMCP210 Adhesive Bypacs
  • CMCP212 Silicone Dielectric
  • CMCP270 Piloted End Mill(s)
  • CMCP200 Mounting Pads

US MSRP: $410.00
Accelerometer Mounting Kit CMCP250 Accelerometer Mounting Kit

  • Complete Kit
  • 1" Spot Facer
  • 25 Mounting Pads
  • 8 Motor Fin Mounts
  • Adhesive and Activator
  • 1/4"x28 UNF Tap
  • Silicone (Grease and RTV)
  • Adhesive Filler
CMCP250 Accelerometer Mounting Kit

US MSRP: $695.00
   
 
1