CMCP261 Liquid Tight Strain Relief Connectors

Liquid Tight Strain Relief Connectors are used for making direct accelerometer or transducer extension cable entries into BNC Junction Boxes. Long cable runs or cables other than the actual extension cable should be installed in conduit. Connectors are constructed of Polyamide and provide both environmental sealing and strain relief. The connectors are temperature rated to -40° to 212° F (-60° to 100° C). The connectors have a pressure rating of up to 150 PSIG.

Specifications:

Part Number	Cable Range	Thread	A - Clearance Hole	B - Body Length	C - Thread Length	D - Wrenching Flats
CMCP261-01	0.08" (2mm) to 0.20" (5mm)	PG 7 / 1/4" NPT	.49" (12.5mm)	.83" (21mm)	.59" (15mm)	.59" (15mm)
CMCP261-02	0.16" (4mm) to 0.31" (8mm)	PG 9	.60" (15.2mm)	.87" (22mm)	.59" (15mm)	.75" (19mm)
CMCP261-03	0.20" (5mm) to 0.35" (9mm)	PG 13.5	.80" (20.3mm)	1.06" (27mm)	.59" (15mm)	.94" (24mm)
CMCP261-04	0.28" (7mm) to 0.47" (12mm)	PG 16	.88" (22.3mm)	1.10" (28mm)	.59" (15mm)	1.06" (27mm)
CMCP261-05	0.35" (9mm) to 0.70" (18mm)	PG 21	1.12" (28.4mm)	1.22" (31mm)	.59" (15mm)	>1.30" (33mm)
CMCP261-06	0.51"(13mm) to 0.78" (20mm)	PG 29	1.47" (37.3mm)	1.53" (39mm)	.59" (15mm)	1.65" (42mm)

Liquid Tight Strain Relief Connectors

Ordering Information:

CMCP261	-XX	Liquid Tight Connectors
		Min. OD	Max. OD
	-01	0.08" (2mm)	0.20" (5mm)
	-02	0.16" (4mm)	0.31" (8mm)
	-03	0.20" (5mm)	0.35" (9mm)
	-04	0.28" (7mm)	0.47" (12mm)
	-05	0.35" (9mm)	0.70" (18mm)
	-06	0.51"(13mm)	0.78" (20mm)