Features:

• CSA and UL Approved Class 1, Div 2, B-D

• CE Approved

• Solid State Reliability

• Integral Sensor

• 4-20 mA Output

• Dynamic Signal Output

The CMCP-420VT is a solid state, loop powered vibration transmitter. It provides a 4-20 mA output that is proportional to overall vibration in terms of velocity. The CMCP-420VT continuously monitors machinery health and transmits directly into a PLC or DCS for trending, alarm and machine shutdown. In addition, the CMCP-420VT provides access to the dynamic transducer output. Portable data collector/analyzers  can be utilized for detailed machine fault analysis.

Simply mount the CMCP-420VT into a tapped hole in the bearing housing or machine case, connect two wires into a 4-20 mA loop, and you are ready to interface into a PLC or DCS. Electrical conduit may be connected directly to the top 3/4" NPT fitting. The CMCP-420VT has a tapped 1/4"-28 UNF hole and has several adaptors to fit almost any application. If the optional LED display is ordered it is shipped loose, and is a simple installation.

Dynamic

Output:

4-20 mA proportional to full scale Velocity

Frequency Response:

2-2,000 Hz

Buffered Output:

Acceleration, 100 mV/g

Accuracy:

±5%

Electrical

Power (Two wire loop power):

+ 18 to + 36 Vdc

Maximum Load:

Grounding:

Case Isolated

Environmental

Operating Temperature:

-20º C to +85º C

Sealed:

Epoxy Encapsulated

Enclosure:

SS, NEMA 4, 4X, 12

Mounting:

1/4"-28 UNF Stud Mounted

Weight:

8 oz. (without display)

CMCP-420BNC

CMCP-420EL

CMCP-420LED

CMCP-420WF

CMCP-420VT

-XX

Loop Powered Solid State Vibration Transmitter

-01

0-1 in/sec (0-25.4 mm/sec) RMS

-02

0-2 in/sec (0-50.8 mm/sec) RMS

CMCP-420LED

-XX

CMCP-420VT Display Retrofit

-01

0-1 in/sec

-02

0-2 in/sec

-03

0-25.4 mm/sec

-04

0-50.8 mm/sec

CMCP-420BNC

BNC Adapter Retrofit

CMCP-420EL

3/4" NPT Elbow

CMCP-420WF

3/4" NPT Weatherproof Cable Fitting