STI Vibration Monitoring, Inc.
Simply the Lowest Cost Approach to Condition Monitoring
Toll Free: 888.777.7213
1010 East Main Street   
League City, TX 77573   
281.334.0766   
Fax 281.334.4255   
Products

Sign up for our Email Newsletter
For Email Marketing you can trust

Follow us on Twitter and Facebook:

Follow us on TwitterFollow us on Facebook

CMCP420VT-T Dual Parameter Loop Powered Vibration
and Temperature Transmitter

CMCP420VT-T Dual Parameter Loop Powered Vibration and Temperature Transmitter

Dual Parameter Loop Powered Vibration and Temperature Transmitter

     Features:

  • CSA and UL Approved Class 1, Div 2, B-D
  • CE Approved
  • Dual Parameter (Vibration and Temperature)
  • Solid State Reliability
  • 2-Wire Loop Powered (4-20 mA)
  • 3/4" NPT for Conduit Connections
  • Industry Standard 1/4" x 28 NF Mounting
  • Optional Display (Vibration or Temperature)

The CMCP420VT-T is a Dual Parameter solid state, loop powered vibration and temperature transmitter. It provides two (2) 4-20 mA output that are proportional to overall vibration in terms of velocity and temperature. The CMCP420VT-T continuously monitors machinery health and transmits directly into a PLC or DCS for trending, alarm and machine shutdown.

CMCP420VT-T Data Sheet PDF Format  CMCP420VT-T Manual in PDF Format Tech Note for CMCP420VT Assembly Instructions CE Approved CSA and UL Approved Class 1, Div 2, B-D

Buy CMCP420VT-T Dual Parameter Loop Powered Vibration and Temperature Transmitter

Simple Installation:

Simply mount the CMCP420VT-T into a tapped hole in the bearing housing or machine case, connect two wires into each 4-20 mA loop, and you are ready to interface into a PLC or DCS. Electrical conduit may be connected directly to the top 3/4" NPT fitting. The CMCP420VT has a tapped 1/4"-28 UNF hole and has several adaptors to fit almost any application. If the optional LED display is ordered it is shipped loose, and is a simple installation.

Specifications:

Dynamic  
Output 1: 4-20 mA proportional to full scale Velocity
Output 2: 4-20 mA proportional to 0-100° C (-32 to 212° F)
Frequency Response: 2-2,000 Hz
Temperature Range: 0-100° C (-32 to 212° F)
Accuracy: ±5% Velocity, 2.5° C temperature
Electrical  
Power (Two wire loop power): + 18 to + 36 Vdc
Maximum Load: 600 Ohms max. @ Vs = 22 to 36 Vdc.
300 Ohms max. @ Vs = 18 Vdc.
Grounding: Case Isolated
Environmental  
Operating Temperature: -20° C to +85° C
Sealed: Epoxy Encapsulated
Enclosure: SS, NEMA 4, 4X, 12
Mounting: 1/4"-28 UNF Stud Mounted
Weight: 8 oz. (without display)

 

Accessories:

CMCP-420VT Loop Powered 4-20 mA Vibration Transmitter

CMCP420EL

CMCP-420VT Loop Powered 4-20 mA Vibration Transmitter

CMCP420LED

CMCP-420VT Loop Powered 4-20 mA Vibration Transmitter

CMCP420WF

 

Dimensions:

CMCP420VT-T Dimensions CMCP420LED dimensions A CMCP420LED dimensions B

 

Ordering Information:

CMCP420VT-T X Loop Powered Solid State Vibration Transmitter
  1 0-1 in/sec (0-25.4 mm/sec) RMS, -32-212° F (0-100° C)
2 0-2 in/sec (0-50.8 mm/sec) RMS, -32-212° F ( 0-100° C)
CMCP420LED -XX CMCP420VT Display Retrofit
  -01 0-1 in/sec
-02 0-2 in/sec
-03 0-25.4 mm/sec
-04 0-50.8 mm/sec
-05 0-100° C 
-06 -32-212° F
CMCP420EL   3/4" NPT Elbow
CMCP420WF   3/4" NPT Weatherproof Cable Fitting

Copyright © 2012 STI Vibration Monitoring Inc. All Rights Reserved.
Sitemap