The CMCP-500 series transmitters are designed for a multitude of sensors.
Standard models are available for all vibration transducers, temperature,
process, and other parameters.
Each monitor provides power to the associated
transducer, processes the signal to determine the amplitude, and outputs a
4-20mA signal. The 4-20mA proportional output is designed for use in
datalogging or process control in the plant's PLC, DCS or HMI.
A BNC connector mounted on the front
of the unit provides access to the buffered transducer output signal. This
includes both the unfiltered vibration signal, and the DC bias voltage.
Portable test equipment or analyzers like SKF-CM's
Micrologcan be connected to this output without disturbing
other system outputs.
Fault Detection -
On board fault detection circuitry
continuously monitors the transducer for normal operation. If a fault
occurs, the output current is reduced to 2 mA to indicate the fault to the
readout system. A red LED on the front of the unit is turned on to provide a
local indication of the fault.
Filters -
For
vibration monitoring applications that require
monitoring specific frequency bands, optional high-pass and low-pass
filters can be specified. (Only available on vibration models)
Displays And
Assemblies -
Various display options, NEMA
and explosion-proof enclosures, and assembled multi-channel systems are
available.
Approved
