CMCP595 Accessory Module

Features:

Low Cost
Provides Terminations
Finished Complete Look
BNC Output for Analyzers
Selectable Resistance Buffers
CCD for Accelerometers
Handles Most Sensors
Up to 4 Buffered Outputs
Selectable Bias Voltage Block
Approved

Description:

The CMCP595 Accessory Module is designed to handle several interfaces including, Key Phasor, Accelerometers, 3-Wire Sensors and as a 4-Way Passive Buffer for vibration signals. The CMCP595 provides termination point and power routing in a matching CMCP500 Series enclosure. The unit provides a BNC Connector for Portable Analyzers.

By changing internal jumpers the CMCP595 Accessory Module can be configured as a:

Key Phasor Module (Eddy Probe -24 VDC)
Key Phasor Module (Hall, Inductive, Proximity +24 VDC)
Accelerometer Module (Accelerometers using Constant Current Diode)
3-Wire Sensor
4-Way Passive Buffer Module

The CMCP595 Module is very versatile and can be used for many more functions as the need arises. Passive Buffers can be individually selected as 0 Ohms, 100 Ohms, 1k Ohm or 10k Ohms. A "Bias Blocker Jumper" is provided to remove Bias voltages from Signals if required.

Caution: Be sure Constant Current Diode (CCD) is in the circuit when powering Accelerometers. Damages to the Accelerometer will occur with direct power.

Ordering Information:

Model	XXX	Description
CMCP595	Key	Key Phasor Module
	Acc	Accelerometer Power Module
	Buf	Buffer Module
	3wi	3-Wire Sensor Module