Provides a smooth surface perpendicular to mounting hole
Disposable and low cost
Piloted End Mill Aircraft Spot Reamers are used to mill a 1"
(2.54 cm) smooth flat area on bearing housings. The
flat area will accept a stud mounted accelerometer or a glue (epoxy) mounted with an
STI Accelerometer Mounting Pad. A 7/32" drill, pilot, allen wrench and end mill are
included in each kit. The 7/32" drilled hole can then be tapped with a 1/4" x 28
UNF starter and bottom tap for stud mounted accelerometers.
