You are here: Home > Sensor Mounting > Mounting Adapters and Studs
Mounting adapters can make use of existing plugged holes on the machine. The CMCP203 Pipe Thread Mounting Adapter is made of 316 Stainless Steel and surfaced for permanently mounted accelerometers. The adapters have a 1/4”-28 UNF threaded hole to mate with the most common accelerometers and vibration transmitters.
Accelerometer mounting studs are used to mount 1/4" thick STI Mounting Pads directly to the tapped bearing housing in combination with epoxy.
Accelerometer thread adapters are used to convert standard 1/4-28 UNF threads to other imperial or metric threads.
Sort By:
1
Accelerometer Mounting Studs CMCP230 Accelerometer Mounting Studs (10 Pack)

  • 10 Pack
  • Stainless Steel
  • 3 Lengths Available
  • 3/8", 1/2" and 3/4"
  • 1/4"x28 UNF Thread
  • Allen Head

NPT Accelerometer Mounting Adapters CMCP203 NPT Pipe Thread Accelerometer Mounting Adapter

  • Use Existing Fittings
  • 316 Stainless Steel
  • Available in 4 NPT Sizes
  • 1/4", 3/8", 1/2" and 3/4"
  • 316 Stainless Steel
  • 1/4"-28 Female Thread

CMCP203 NPT Mounting Adapter Data Sheet

Stainless Steel Thread Adapters CMCP237 Accelerometer Thread Adapters (English/Metric)

  • Stainless Steel
  • Slotted Ends
  • 1/4"-28 UNF to M8x1.25
  • 1/4"-28 UNF to M10x1
  • 1/4"-28 UNF to M6x1.25
  • 1/4"-28 UNF to M6x1

Stainless Steel Thread Adapters CMCP238 Accelerometer Thread Adapters (English/English)

  • Stainless Steel
  • Slotted Ends
  • 1/4"-28 UNF to 5/16-24
  • 1/4"-28 UNF to 3/8"-24
  • 1/4"-28 UNF to 1/2"-20
  • 1/4"-28 UNF to 1/4"-20
  • 1/4"-28 UNF to 10-32

CMCP239 Swivel Mounting Adapter CMCP239 Swivel Mount

  • Swivel Mount
  • 316 Stainless Steel
  • Slotted (Machine End)
  • 4 mm Allen (Accelerometer End)
  • 1/4"-28 Male to 1/2"-20 Female Adapter
  • 1/4"-28 Male to 1/2"-20 Male (Machine Side)
  • Use with any Small Body Accelerometer
CMCP239 Swivel Mount

   
 
1