You are here: Home > Sensor Mounting > Proximity Probe Mounting
STI manufactures all the Proximity Probe (Eddy Current Probe) mounting hardware you need for your Journal Bearing  installation, for either Internal or External mounting. Our hardware includes Probe Stinger Assemblies for External Mounting (Through Bearing Housing) or Internal Mounting (Side of Journal Bearing). Proximitor Housings, in either Painted Steel or Stainless Steel, are available for all manufacturer's Proximitors or Drivers footprints. Proximity Probe Mounting Hardware is in Stock and ready for direct shipment or pick-up!
Sort By:
1
CMCP-TKSC Shaft Calibrator CMCP-TKSC Proximity Probe Shaft Calibrator

  • Easy to Use
  • QuickClick for Precise Incremental Measurements
  • Measure Actual Shaft or Rod Sensitivity
  • Accepts Proximity Probes up to 0.400 dia.
  • 0.50” or 12.7 mm Range
  • Delrin Base, proven not to affect Sensitivity
  • Mounting Strap Included


CMCPTKSC Proximity Probe Shaft Calibrator Data Sheet

Painted Steel Driver Enclosures CMCP140 NEMA 4 Painted Steel Enclosures for DIN Rail Drivers

  • Painted Steel
  • NEMA 4
  • 4, 6, 8, or 10 Proximitors
  • DIN Rail
  • ANSI 61 Powder Coated
  • 14 gauge Mild Steel
  • Stainless Steel Clamps
  • Oil Resistant Gasket

    • CMCP140 Data Sheet

    Stainless Steel Enclosure for DIN Rail Drivers CMCP150 NEMA 4X Stainless Steel Enclosure for DIN Rail Drivers

  • Stainless Steel
  • NEMA 4X
  • 4, 6, 8, or 10 Proximitors
  • DIN Rail
  • ANSI 61 Powder Coated
  • 14 gauge Stainless Steel
  • Stainless Steel Clamps
  • Oil Resistant Gasket

    • CMCP150 Data Sheet

    Proximity Probe NPT Adapter CMCP4190 NPT Proximity Probe Adapters

    • External Mounting for Proximity Probes
    • 316 Stainless Steel
    • 1/2" or 3/4" NPT External Threads
    • 1/4"x28 or 3/8"x24 UNF Internal Threads
    • Optional XP Conduit Head
    • Adjust Probes from Outside Machine
    • Meets API-670

    CMCP4190 Data Sheet


    Proximity Probe Calibrator CMCP610 QuickClick Benchtop Static Calibrator

    • Verify Probe Calibration
    • 5mm or 8mm Proximity Probes
    • 0.001" Precision Increments
    • 4140 Steel Target
    • Microsoft Excel Spreadsheet
    • English or Metric Available
    • 4 collets 1/4", 3/8", M8 & M10
    • Carrying Case Included

    CMCP-610 Proximity Probe Static Calibrator Data Sheet

    Relative Proximity Probe Holder CMCP801 Proximity Probe External Stinger

    • External Mount for Proximity Probes
    • Meets API-670
    • 12" Insertion Depth
    • Stainless Steel
    • Aluminum Conduit Head
    • 1/4"x28 or 3/8"x24 Threaded Probes
    • 2" of Probe Adjustment
    • Oil Tight (Parker Seal)
    • 3/4" NPT (1/2" Adapter Available)
    CMCP801 Datasheet

    Dual Probe CMCP801DP Dual Probe Holder

    • Dual Probe Holder
    • Proximity Probe and Velocity Sensor
    • For Measuring Absolute Vibration
    • 12" Insertion Depth
    • Stainless Steel
    • Aluminum Conduit Head
    • 1/4"x28 or 3/8"x24 Threaded Probes
    • 2" of Probe Adjustment
    • Oil Tight (Parker Seal)
    • 3/4" NPT (1/2" Adapter Available)
    CMCP801DP Data Sheet

    Relative Proximity Probe Holder CMCP801QD Quick Disconnect Proximity Probe Holder

    • Meets API 670 External Mounting Specifications
    • Quick Disconnect Coupling
    • Removal without Re-Gapping
    • Fits 4 Probe Sizes
    • IP66 Rated, NEMA 4 Raintight
    • 316 Stainless Steel Probe Holder
    • Explosionproof Cast Aluminum Housing
    • Four 3/4" NPT Conduit Hubs
    CMCP801QD Datasheet

    3/4"NPT to 1/2"NPT Adapter CMCP802 3/4"NPT to 1/2"NPT Adapter for CMCP801

    • CMCP801 Thread Adapter
    • Stainless Steel
    • 3/4" NPT to 1/2" NPT
    • Adds 2" to Height

    XP Conduit Head CMCP803 Explosion Proof Conduit Head


    • Explosion Proof Conduit Head
    • Use with CMCP4190 Adapters
    • 5 Threaded Hubs
    • Provided with 3 Close Up Plugs
    • Aluminum (Copper Free)
    • 2" Dome Lid w/O-Ring
    • 1/2" or 3/4" NPT

    Proximity Probe Mounting Bracket CMCP805 Proximity Probe Mounting Block

    • Two Sizes Available (1/4”-28 and 3/8”-24)
    • Machined Aluminum
    • Optional Delran Blocks for Isolated Mounting
    • Threaded and Slotted for Position and Stability
    • Low Profile
    • Mounting Hardware Included (10-24 UNC)
    CMCP805 Datasheet

       
     
    1