Navigate to the STI Vibration Monitoring Inc. homepage

-
You are here: Home > Test Equipment > Proximity Probe Testing
The battery powered Wobulators are designed to simulate shaft vibrations. This allows users to verify end to end sensor proximity probe system operation and validate monitoring systems.
Click on the image below to view the product page.
    CMCP-TKPW Pocket Wobulator

    CMCP-TKPW-KIT Pocket Wobulator Test Kit

    • Compact, Battery Powered Wobulator
    • Compact Static Calibrator Included
    • For Use with Proximity Probe Systems
    • 4140 Steel Wobble Plate
    • 0-15 mil (0-381um) Dynamic Range
    • Collets for English and Metric Probe Sizes
    • Precision Dial Indicator
    • Variable Speed (0-7,000 RPM)
    • Tachometer and Key Phase Notch for Speed Probes
    • Includes Travel Case, Battery Pack, Charger and Mounting Magnet

    CMCP-TKPW-KIT Datasheet

    $3,050.00
    Select Options
    CMCP-TKPW Pocket Wobulator

    CMCP-TKPW Pocket Wobulator

    • Compact, Battery Powered Wobulator
    • For Use with Proximity Probe Systems
    • 4140 Steel Wobble Plate
    • 0-15 mil (0-381um) Dynamic Range
    • Collets for English and Metric Probe Sizes
    • Precision Dial Indicator
    • Variable Speed (0-7,000 RPM)
    • Tachometer and Key Phase Notch for Speed Probes
    • Includes Travel Case, Battery Pack, Charger and Mounting Magnet

    CMCP-TKPW Datasheet

    $2,550.00
    Select Options
    CMCP-TKSG Field Signal Generator Kit

    CMCP-TKSG Field Signal Generator Kit

    • Lithium-Ion Battery Powered with Smart Charger
    • >80+ Hours of Runtime
    • Calibrated Acceleration, Velocity and Displacement Outputs
    • BNC Female Output Connector
    • Peak to Peak and RMS Selectable
    • 318 Hz Fixed Signal Frequency
    • 10 Fixed AC Vibration Amplitude Selections plus Variable Output
    • 10 Fixed DC Gap Selections plus Variable Output
    • 0 to -20.0 VDC DC Range
    • Works with both +24 and -24 VDC Powered Systems
    • ±10.0 VDC Bias for Accelerometers and Proximity Systems

    CMCP-TKSG
    $1,495.00
    CMCP-TKPro Vibration Test Kit

    CMCP-TKPro Vibration Test Kit

    • Battery Powered
    • Li-Ion 3.2 Ah Battery
    • 82 mA Draw @ 3600 RPM
    • Smart Charger
    • 0-15 mils Dynamic Range
    • Precision Dial Micrometer
    • Variable Speed to 11,000 RPM
    • Tachometer Display
    • English and Metric Versions
    • Weatherproof Travel Case
    • Plastic Feeler Gauges for Quick Gap
    CMCP-TK-Pro Vibration Test Kit Data Sheet
    $2,950.00
    Select Options
    CMCP-TKPro Shaft Rider

    CMCP-TKPro Shaft Rider

    • Accessory for the CMCP-TKPro
    • Allows Accelerometer Verification
    • Spring Loaded Shaft Rider System
    • Easily attaches to the CMCP-TKPro
    • Generates useful Velocity levels
    CMCP-DVS Vibration Switch

    $295.00
    CMCP-TKPC Pocket Calibrator

    CMCP-TKPC QuickClick Pocket Calibrator

    • Verify Proximity Probe Calibration
    • Small Portable 1.5” Dia. x 3.5” (38 x 89 mm)
    • 4 Sizes of Collets ¼”, 3/8”, M8 and M10
    • 4140 Steel, 0.938“ (24 mm) Dia. Target
    • Table or Magnetic Mount
    • Hard Carrying Case
    • Fits in your Briefcase or Backpack
    • English or Metric Micrometer
    • 5 mil or 0.1mm Quick Click

    CMCP-TKPC Datasheet

    $595.00
    Select Options
    Proximity Probe Calibrator

    CMCP610 QuickClick Benchtop Static Calibrator

    STI
    • Verify Probe Calibration
    • 5mm or 8mm Proximity Probes
    • 0.001" Precision Increments
    • 4140 Steel Target
    • Microsoft Excel Spreadsheet
    • English or Metric Available
    • 4 collets 1/4", 3/8", M8 & M10
    • Carrying Case Included

    CMCP-610 Proximity Probe Static Calibrator Data Sheet

    $850.00
    Select Options
    CMCP-TKSC Shaft Calibrator

    CMCP-TKSC Proximity Probe Shaft Calibrator

    • Easy to Use
    • QuickClick for Precise Incremental Measurements
    • Measure Actual Shaft or Rod Sensitivity
    • Accepts Proximity Probes up to 0.400 dia.
    • 0.50” or 12.7 mm Range
    • Delrin Base, proven not to affect Sensitivity
    • Mounting Strap Included


    CMCPTKSC Proximity Probe Shaft Calibrator Data Sheet

    $745.00
    Select Options
    Proximity Probe Calibrator

    CMCP-Collets

    STI
    Black Anodized Aluminum
    Laser Marked for Size
    1/4", 3/8", M8, M10, and M14 Sizes
    Fits CMCP610, CMCP-TKPC, and CMCP-TKPro
    $69.00
    Select Options
Proximity Probe Testing From STI Vibration Monitoring
STI Vibration Monitoring has revolutionized the world of vibration analysis with their latest innovation - battery powered Wobulators. These advanced devices are capable of simulating shaft vibrations with unparalleled accuracy, giving engineers and technicians a comprehensive understanding of their machinery's performance.
With the ability to simulate a wide range of vibration levels and frequencies, these Wobulators provide valuable insights into the health of critical rotating equipment. The best part? They are completely portable and powered by batteries, making them the perfect tool for on-site troubleshooting and predictive maintenance. With our battery powered Wobulators, you can stay ahead of potential breakdowns and ensure uninterrupted operations, ensuring maximum efficiency and cost savings for your business.

Get access to the latest deals and more!