You are here: Home > Sensor Mounting > End Mills (Spot Facers)
Accelerometer installation tool kits, or Spot Face Tools, are used to prepare a round flat area on your machine's bearing for the mounting of Accelerometers or Accelerometer Mounting Pads. Accelerometers and Velocity Sensors need a smooth flat surface to perform to their optimum specifications. Once the smooth flat area is prepared, the Accelerometer Sensor may be either epoxy or stud mounted. Installation Tool Kits or Spot Face Kits include a Spot Facer (End Mill), Pilot, Drill, Tap, and Allen Wrench. An indexable Spot Facer Kit is also available that allows for replacing the cutting teeth and is recommended for high usage cases. STI carries Accelerometer Installation Kits and Spot Face Kits in stock and are ready for immediate delivery or Pick-Up.
Sort By:
1
Spot Reamer CMCP270 Series 1" Accelerometer Mounting Tool Kits

  • Guaranteed In Stock
  • 1” Diameter Spot Facer with Adjustable Drill Bit
  • TiN-coated Drill Bit and Tap for Longer Life
  • Drill and Mill in One Action
  • No Pilot Required
  • For Thread Mounting or Adhesive Mounting
  • For Use with Portable Power Drills
  • Available for ¼”-28, M6x1 or M8x1.25
CMCP270 Series Accelerometer Mounting Tool Kit

Spot Reamer CMCP270L Series 1 1/8" Accelerometer Mounting Tool Kits

  • Guaranteed In Stock
  • 1 1/8" Diameter Spot Facer with Adjustable Drill Bit
  • TiN-coated Drill Bit and Tap for Longer Life
  • Drill and Mill in One Action
  • No Pilot Required
  • For Thread Mounting or Adhesive Mounting
  • For Use with Portable Power Drills
  • Available for ¼”-28, M6x1 or M8x1.25
CMCP270L Series Accelerometer Mounting Tool Kit

Piloted Spot Reamer CMCP270S Series 3/4" Accelerometer Mounting Tool Kits

  • Guaranteed In Stock
  • 3/4” Diameter Spot Facer
  • TiN-coated Drill Bit and Tap for Longer Life
  • For Thread Mounting or Adhesive Mounting
  • For Use with Portable Power Drills
CMCP270 Series Accelerometer Mounting Tool Kit

Indexable Spot Reamer CMCP271 Series 1" Diameter Indexable Counter Bores

  • Guaranteed In Stock
  • Longer Life
  • 1” Diameter Spot Facer with Pilot
  • TiN-coated Drill Bit and Tap for Longer Life
  • 10 Triangular Cutting Blades
  • For Use with Portable Power Drills
  • Available for ¼”-28, M6x1 or M8x1.25
CMCP271 Series Indexable Counter Bores

Piloted Spot Reamer CMCP272 Spare 1" Counterbore

  • Guaranteed In Stock
  • 1” Diameter Spot Facer with Hex Key
  • No Pilot Required

Piloted Spot Reamer CMCP274 Spare Taps

  • For 1/4-28, M6 or M8 Threaded Sensors
  • Includes 1 Tap

Piloted Spot Reamer CMCP273 Spare Drill Bits

  • For 1/4-28, M6 or M8 Threaded Sensors
  • Includes 1 Drill Bit

   
 
1