You are here: Home > Temperature Sensors
Temperatures sensors for industrial machinery include spring loaded bearing temperature sensors, like the CMCP1210 series of Tip sensitive RTD or Thermocouple sensors for bearings, blocks, and other solids. Mounting pads with integrated Temperature make it easy to add temperature measurements to existing accelerometer installations. Temperature Transmitters are compatible with RTD's, Thermocouple or solid-state temperature sensors. The transmitters check for faults, processes the temperature signal to determine overall amplitude, and output a 4-20 mA dc current that is proportional to a preset range.
Sort By:
1
Spring Loaded Temperature Sensor CMCP1210 Spring Loaded Tip Sensitive Bearing Temperature Sensors

  • Tip Sensitive RTD or Thermocouple
  • For use to 260° C (500° F)
  • Adjustable Spring-Loaded Holder with Fluid Seal
  • Aluminum or Stainless Steel Connection Head
  • For Bearings, Blocks and Other Solids
  • Explosion Proof Versions Available

CMCP1210 RTD Data Sheet

CMCP200ET Mounting Pad with Electronic Temperature CMCP200ET Mounting Pad with Electronic Temperature

  • Accelerometer Mounting Pad
  • 0° to 100° C (32° to 212° F)
  • 10 mv/°C
  • 0.5°C Accuracy
  • Blue/Common, Black/Signal, Brown/Power)
  • 4.0 to 30.0 VDC Power
  • 3-Pin M8 Male Connector
  • 1” D x 0.40 H
  • Through Hole for ¼”-28 Stud or Bolt
  • 16 RMS Finish One Side
CMCP200ET Data Sheet

CMCP200RTD Mounting Pad with Temperature CMCP200RTD Mounting Pad with Temperature

  • Accelerometer Mounting Pad
  • 3-Wire 100 Ohm Platinum RTD
  • -40° to 225°C (-40° to 437°F)
  • 1.4 mA, ±3850 ppm/°C
  • Conformal to DIN EN 60751 Class A
  • Integral Armored Braided Wire
  • 5, 10, 20 Meter Lengths
  • White/Red/Red Teflon Leads
  • 316SS 1” Dia. x 0.375 H
  • Through Hole for ¼”-28 Stud or Bolt
  • 16 RMS Finish for Accelerometer
CMCP200RTD Data Sheet

RTD Temperature Transmitter/Monitor CMCP560 RTD Temperature Transmitter/Monitor

  • RTD Input
  • Temperature Output
  • Transmitter or Monitor
  • Voltage Detection
  • 100 Ohm Plat. Standard
  • 4-20 mA Output
  • 2 Buffered Outputs
  • 5 Selectable Ranges
  • Fault (OK) Detection
  • CSA & UL C1,D2
  • DIN Rail Mount

CMCP560 Data Sheet

TC Temperature Transmitter/Monitor CMCP565 Thermocouple Temperature Transmitter/Monitor

  • Thermocouple Input
  • Temperature Output
  • Transmitter or Monitor
  • Voltage Detection
  • Type J and K Standard
  • 4-20 mA Output
  • 2 Buffered Outputs
  • 5 Selectable Ranges
  • Fault (OK) Detection
  • CSA & UL C1,D2
  • DIN Rail Mount
CMCP565 Data Sheet

Solid State Temperature Transmitter/Monitor CMCP570 Solid State Temperature Transmitter/Monitor

  • Solid State Temp. Input
  • Temperature Output
  • Transmitter or Monitor
  • Voltage Detection
  • Type "T" Accelerometers
  • 4-20 mA Output
  • 2 Buffered Outputs
  • 5 Selectable Ranges
  • Fault (OK) Detection
  • CSA & UL C1,D2
  • DIN Rail Mount

CMCP570 Datasheet

Display and Relay Module for Voltage or Current Output Sensors CMCP730D Relay and Display Module

  • Universal Display and Relay Module
  • Accepts Voltage, Current, RTD or Thermocouple Inputs
  • Compatible with any 4-20mA Sensor or Transmitter
  • Local LCD Display
  • Local Alert and Danger Indicators
  • 4-20mA or Voltage Output
  • Two Relay Outputs
  • Latching or Non-Latching Relays
  • Adjustable Time Delay

CMCP730D Datasheet

NPT Adapter 1/2" to 3/4" NPT Adapter 1/2" to 3/4"

  • CMCP1210 NPT Adapter
  • 1/2" to 3/4" NPT
  • 316 Stainless Steel
  • 1" Long

   
 
1