You are here: Home > Accelerometers > Piezo-Velocity
STI offers a complete line of Piezo Velocity Sensors. The CMCP700 sensors are available with standard 2 Pin MS Connectors, M12 Connectors or with different Integral Cables. Piezo Velocity Sensors are based on a Accelerometer but with an integration circuit onboard to produce a dynamic output in Velocity instead of Acceleration. These sensors can solve low signal issues by providing a higher millivolt output. As the integration is performed internally where lower noise is present a cleaner signal is provided. For long wire distances they are provided with your choice of 100 or 500 mV per in/sec output.
Sort By:
1
Top Exit Velocity Transducer CMCP793V Top Exit Velocity Transducer

  • General Purpose Velocity Transducer
  • Top Exit, 2 Pin MS Connector
  • 100 or 500 mV/in/sec ±10%
  • 2 to 6 kHz Frequency Response
  • 1 Second Settling Time
  • -67 to +284 °F (-55 to +140 °C)
  • 1/4" x 28 UNF and M8x1.25 Mounting Stud
  • Class I Division II Approved
CMCP793V Velocity Transducer

Side Exit Velocity Transducer CMCP797V Velocity Transducer, Side Exit

  • General Purpose Velocity Transducer
  • Side Exit, 2 Pin MS Connector
  • 100 mV/In/Sec ±10%
  • 2 Hz to 6 kHz Frequency Response
  • 1 Second Settling Time
  • -67 to +284 °F (-55 to +140°C)
  • 1/4"-28 UNF or M8x1.25 Captive Bolt
  • Class I Division II Approved
CMCP797V Side Exit Piezoelectric Velocity Sensor

   
 
1