You are here: Home > Accelerometers > General Purpose
Standard AccelerometersOur Standard Accelerometers for General Purpose Applications are based on the CMCP700 Series of Sensors and are comprised of three categories: Economical, General and Premium Sensors. Each accelerometer is fully enclosed in a 316 Stainless Steel case with the same dimensions regardless of the category. However, the sensors differ by its specifications, approvals and connector options. All Standard Accelerometer come with STI’s Lifetime Warranty, and the General and Premium Sensors are Class 1 Division 2 Hazardous Area approved.
Sort By:
1
CMCP1100C Low Cost Industrial Accelerometer CMCP1100C Compact, M8 Connector

  • Low-Cost Compact
  • 3-Pin M8 Connector, Top Exit
  • 100 mV/g ±10%
  • (±3dB): 0.32 Hz to 10 kHz (19.2 cpm to 600k cpm)
  • -65 to +185°F (-54 to +85°C)
  • 2.5 Second Settling Time
  • 1/4"-28 UNF Male Mounting Stud
  • CE Approved
CMCP1100C Compact Accelerometer

Side Exit General Purpose Accelerometer CMCP785A General Purpose, Side Exit

  • 100 mV/g ±10%
  • 2 Pin MS Connector, Side Exit
  • 0.8 Hz to 12 kHz (48 cpm to 720k cpm)
  • 1.5 Second Setting Time
  • -67 to +284°F (-55 to +140°C)
  • 1/4" x 28 UNF or M8x1.25 Captive Bolt
  • Class I Division II Approved
  • Lifetime Warranty
CMCP785A Accelerometer Datasheet

Side Exit General Purpose Accelerometer CMCP785A-I General Purpose, Side Exit

  • General Purpose, with cable protection
  • Side Exit, Integral Braided Armor Cable
  • 100 mV/g ±10%
  • 0.8 Hz to 12 kHz (48 cpm to 720k cpm)
  • 1.5 Second Setting Time
  • -67 to +284°F (-55 to 140°C)
  • 1/4" x 28 UNF or M8x1.25 Captive Bolt
  • Class I Division II Approved
  • Lifetime Warranty
CMCP785A-I Accelerometer with Integral Cable Datasheet

Side Exit Submersible Accelerometer CMCP785A-IP Submersible Accelerometer, Side Exit

  • Submersible Accelerometer, rated IP68
  • Side Exit, PUR Jacketed Cable
  • 100 mV/g ±10%
  • 0.8 Hz to 12 kHz (48 cpm to 720k cpm)
  • 1.5 Seconds Setting Time
  • -67 to +284°F (-55 to 140°C)
  • 1/4" x 28 UNF or M8x1.25 Captive Bolt
  • Class I Division II Approved
  • Lifetime Warranty
CMCP785A-IP Datasheet

Top Exit General Purpose Accelerometer CMCP786A General Purpose, Top Exit

  • 100 mV/g ±10%
  • 2 Pin MS Connector, Top Exit
  • 0.8 Hz to 12 kHz (48 to 720k cpm)
  • 1.5 Seconds Setting Time
  • -67 to +284°F (-55 to 140°C)
  • 1/4" x 28 UNF and M8x1.25 Mounting Studs
  • Class I Division II Approved
  • Lifetime Warranty

CMCP786A Accelerometer Datasheet

Top Exit Compact Accelerometer CMCP786A-I General Purpose, Top Exit

  • General Purpose, with cable protection
  • Top Exit, Integral Stainless Steel Overbraided Cable
  • 100 mV/g ±10%
  • 0.8 Hz to 12 kHz (48 cpm to 720k cpm)
  • 1.5 Second Setting Time
  • -67 to +284°F (-55 to +140°C)
  • 1/4" x 28 UNF and M8x1.25 Mounting Studs
  • Class I Division II Approved
  • Lifetime Warranty

CMCP786A-I Accelerometer with Armored Integral Cable

Top Exit Compact Accelerometer, Paper Machine Accelerometer, Paper Machine Vibration CMCP786A-IP Submersible Accelerometer, Top Exit

  • Submersible Accelerometer, rated IP68
  • Top Exit, PUR Jacketed Cable
  • 100 mV/g ±10%
  • 0.8 Hz to 12 kHz (48 cpm to 720k cpm)
  • 1.5 Seconds Setting Time
  • -67 to +284°F (-55 to +140°C)
  • 1/4" x 28 UNF and M8x1.25 Mounting Studs
  • Class I Division II Approved
  • Lifetime Warranty

CMCP786A-IP
   
 
1