You are here: Home > Accelerometers > Dual Output (Temp)
Dual OutputSTI’s Dual Output Accelerometers provide both a standard 100 mV/g vibration and a 10 mV/°C temperature signal using a 3-pin MS Connector. They are Class 1, Division 2 Hazardous Area Rated and come with a Lifetime Quality Warranty. Available in both Top and Side Exit Versions. Three (3) Conductor Extension Cables with matching MS Connector are in stock for immediate shipment.
Sort By:
1
CMCP1100CT Low Cost Industrial Accelerometer CMCP1100CT Low Cost Accelerometer with Temperature

  • Compact Dual Output
  • Top Exit, 3 Pin M8 Connector
  • Acceleration: 100 mV/g ±10%
  • Temperature: 10 mV/°C, 0-100°C (Optional)
  • Frequency Response: (±3dB): 0.32 Hz to 10 kHz
  • Temperature Range: -65 to +185°F (-54 to +85°C)
  • Mounting: 1/4"-28 UNF Stud
  • Small ½” Footprint
CMCP1100CT Compact Accelerometer

CMCP1100ST Accelerometer with Temperature CMCP1100ST Dual Output Accelerometer

  • Low Cost Acceleration and Temperature
  • Side Exit, Integral Cable
  • Acceleration: 100 mV/g ±10%
  • Temperature: 10 mV/°C, 0 to +100°C (32 to +212°F)
  • 0.32 Hz to 10 kHz
  • -65 to 185°F (54 to +85°C)
  • 1/4"x28 UNF Mounting Stud
  • Small 1/2" Footprint
CMCP1100ST Data Sheet

CMCP1100T Dual Output Accelerometer CMCP1100T Dual Output Low Cost Accelerometer

  • Low Cost Acceleration and Temperature
  • Top Exit, Integral Cable
  • 100 mV/g ±10% and 10 mV/°C
  • 0.32 Hz to 10 kHz (19.2 to 600k cpm)
  • -65 to +185°F (-54 to +85°C)
  • 1/4"x28 UNF Mounting Stud
  • 2.5 Second Settling Time
  • 0.5" (12.7 mm) Diameter
CMCP1100T Datasheet

CMCP1300ST-T Triaxial Accelerometer with Temperature CMCP1300ST-T Low Cost Triax with Temperature

    • Low Cost Triaxial Accelerometer with Temperature
    • Side Exit, 5 Pin M12 Connector
    • 100 mV/g Per Axis
    • 10 mV/°C Temperature Output
    • 0.32 Hz to 10 kHz (19.2 to 900k cpm)
    • -65 to +185°F (-54 to +85°C)
    • 1/4-28 UNF or M8x1.25 Mounting Bolt
    • 316 Stainless Steel Case

      CMCP1300ST-T Triaxial Accelerometer with Temperature

    CMCP760TT CMCP760TT Triaxial Accelerometer with Temperature Output

    • General Purpose, Triaxial Accelerometer with Temperature
    • Side Entry, M12 Connector
    • 100 mV/g ±10% and 10mV/°C Temperature Output
    • 0.8 to 15 kHz (48 to 900K cpm) Frequency Range
    • 1 Second Setting Time
    • -67 to +302°F (-55 to 150°C)
    • 1/4"-28 UNF or M8x1.25 Captive Bolt
    • Lifetime Warranty
      CMCP760TT Dual Output Triaxial Accelerometer

    Side Exit General Purpose Accelerometer with Temperature Output CMCP785T Dual Output, Side Exit

    • General Purpose, Acceleration and Temperature
    • 100 mV/g ±10%
    • 10 mV/°C Temperature Output
    • 3 Pin MS Connector, Side Exit
    • 0.8 Hz to 12 kHz (48 cpm to 720k cpm)
    • 1.5 Second Setting Time
    • -67 to +284°F (-55 to +140°C)
    • 1/4" x 28 UNF or M8x1.25 Captive Bolt
    • Class I Division II Approved
    • Lifetime Warranty
    CMCP785T Dual Output Accelerometer

    Side Exit General Purpose Accelerometer with Temperature Output CMCP785T-I Dual Output, Side Exit, Integral Cable

    • General Purpose, Acceleration and Temperature
    • Side Exit, Integral Overbraided Cable
    • 100 mV/g ±10%
    • 10 mV/°C Temperature Output
    • 0.8 Hz to 12 kHz (48 cpm to 720k cpm)
    • 1.5 Seconds Setting Time
    • -67 to +284°F (-55 to +140°C)
    • 1/4" x 28 UNF or M8x1.25 Captive Bolt
    • Class I Division II Approved
    • Lifetime Warranty
    CMCP785T-I Dual Output Accelerometer

    Side Exit General Purpose Submersible Accelerometer with Temperature Output CMCP785T-IP Dual Output, Submersible, Integral Cable

    • General Purpose, Acceleration and Temperature
    • Side Exit, Submersible with Integral PUR Cable
    • 100 mV/g ±10%
    • 10 mV/°C Temperature Output
    • 0.8 Hz to 12 kHz (48 cpm to 720k cpm)
    • 1.5 Seconds Setting Time
    • -67 to +284°F (-55 to +140°C)
    • 1/4" x 28 UNF or M8x1.25 Captive Bolt
    • Class I Division II Approved
    • Lifetime Warranty
    CMCP785T-IP Dual Output Accelerometer

    Top Exit General Purpose Accelerometer with Temperature Output CMCP786T Dual Output, Top Exit

    • General Purpose, Acceleration and Temperature
    • 100 mV/g ±10%
    • 10 mV/°C Temperature Output
    • 3 Pin MS Connector, Top Exit
    • 0.8 Hz to 12 kHz (48 cpm to 720k cpm)
    • 1.5 Second Setting Time
    • -67 to +284°F (-55 to +140°C)
    • 1/4" x 28 UNF and M8x1.25 Mounting Studs
    • Class I Division II Approved
    • Lifetime Warranty
    CMCP786T Dual Output Accelerometer

    Top Exit General Purpose Accelerometer with Temperature Output CMCP786T-I Dual Output, Integral Cable, Top Exit

    • General Purpose, Acceleration and Temperature
    • Top Exit, Overbraided Integral Cable
    • 100 mV/g ±10%
    • 10 mV/°C Temperature Output
    • 0.8 Hz to 12 kHz (48 cpm to 720k cpm)
    • 1.5 Second Setting Time
    • -67 to +284°F (-55 to +140°C)
    • 1/4" x 28 UNF and M8x1.25 Mounting Studs
    • Class I Division II Approved
    • Lifetime Warranty
    CMCP786T-I Dual Output Accelerometer

    Top Exit General Purpose Accelerometer with Temperature Output CMCP786T-IP Dual Output, Submersible, Top Exit

    • General Purpose, Acceleration and Temperature
    • Top Exit, Integral Cable
    • 100 mV/g ±10%
    • 10 mV/°C Temperature Output
    • 0.8 Hz to 12 kHz (48 cpm to 720k cpm)
    • 1.5 Second Setting Time
    • -67 to +284°F (-55 to +140°C)
    • 1/4" x 28 UNF and M8x1.25 Mounting Studs
    • Class I Division II Approved
    • Lifetime Warranty
    CMCP786T-IP Dual Output Accelerometer

    Side Exit Premium Accelerometer CMCP787T Premium Dual Output, Side Exit

    • Premium Acceleration and Temperature
    • Top Exit, 3 Pin MS Connector
    • 100 mV/g ±5%
    • 10 mV/°C (0 to 1 VDC)
    • 0.8 Hz to 15 kHz (48 cpm to 900k cpm)
    • 1 Second Setting Time
    • -67 to +302°F (-55 to 150°C)
    • 1/4" x 28 UNF or M8x1.25 Captive Mounting Bolt
    • Class I Division II Approved
    • Lifetime Warranty
    CMCP787T

    Side Exit General Purpose Accelerometer with Temperature Output and Armored Integral Cable CMCP787T-I Dual Output, Side Exit, Integral Cable

    • Premium, Acceleration and Temperature
    • Side Exit, Integral Overbraided Cable
    • 100 mV/g ±10%
    • 10 mV/°C Temperature Output
    • 0.8 Hz to 15 kHz (48 cpm to 900k cpm)
    • 1.0 Second Setting Time
    • -67 to +284 °F (-55 to +140 °C)
    • 1/4" x 28 UNF or M8x1.25 Captive Bolt
    • Class I Division II Approved
    • Lifetime Warranty
    CMCP787T-I Dual Output Accelerometer

    Side Exit Premium Accelerometer CMCP787T-IP Premium Dual Output, Submersible

    • Premium Acceleration and Temperature
    • Side Exit, Integral PUR Jacketed Cable
    • 100 mV/g ±5%
    • 10 mV/°C (0 to 1 VDC)
    • 0.8 Hz to 15 kHz (48 cpm to 900k cpm)
    • 1 Second Setting Time
    • -67 to +302 °F (-55 to 150 °C)
    • 1/4" x 28 UNF and M8x1.25 Mounting Stud
    • Class I Division II Approved
    • Lifetime Warranty
    CMCP787T-IP

    Top Exit Premium Accelerometer CMCP788T Premium Dual Output, Top Exit

    • Premium Acceleration and Temperature
    • Top Exit, 3 Pin MS Connector
    • 100 mV/g ±5%
    • 10 mV/°C (0 to 1 VDC)
    • 0.8 Hz to 15 kHz (48 cpm to 900k cpm)
    • 1 Second Setting Time
    • -67 to +302°F (-55 to +150°C)
    • 1/4" x 28 UNF and M8x1.25 Mounting Stud
    • Class I Division II Approved
    • Lifetime Warranty
    CMCP788T

    Top Exit Premium Accelerometer CMCP788T-I Premium Dual Output, Integral Cable

    • Premium Acceleration and Temperature
    • Top Exit, Overbraided Integral Cable
    • 100 mV/g ±5%
    • 10 mV/°C (0 to 1 VDC)
    • 0.8 Hz to 15 kHz (48 cpm to 900k cpm)
    • 1 Second Setting Time
    • -67 to +302 °F (-55 to +150 °C)
    • 1/4" x 28 UNF and M8x1.25 Mounting Stud
    • Class I Division II Approved
    • Lifetime Warranty
    CMCP788T-I

    Top Exit Premium Accelerometer CMCP788T-IP Premium Dual Output, Submersible

    • Premium Acceleration and Temperature
    • Top Exit, Integral PUR Jacketed Cable
    • 100 mV/g ±5%
    • 10 mV/°C (0 to 1 VDC)
    • 0.8 Hz to 15 kHz (48 cpm to 900k cpm)
    • 1 Second Setting Time
    • -67 to +302°F (-55 to 150°C)
    • 1/4" x 28 UNF and M8x1.25 Mounting Stud
    • Class I Division II Approved
    • Lifetime Warranty
    CMCP788T-IP

       
     
    1