You are here: Home > Transmitters and Monitors > 4-20 mA Sensors
2-Wire Vibration TransmitterSTI Vibration Monitoring’s 4-20mA sensors are an accelerometer and transmitter combined into one housing. Each sensor provides a 4-20mA output signal proportional to the overall vibration level in terms of acceleration, velocity or temperature. 4-20mA sensors can interface directly with process control systems such as PLC, DCS and SCADA systems creating a low cost and effective continous monitoring system. All 4-20mA sensors are approved for use in Class 1 Division 2 areas or Class 1 Division 1 with an approved barrier. STI keeps all popular models in stock for immediate delivery.
Sort By:
1
CMCP420VT Loop-Powered Vibration Transmitter CMCP420VT Loop-Powered Vibration Velocity Transmitter with Dynamic Output

  • Velocity and Dynamic (100mV/g) Output
  • Solid State Reliability
  • 2-Wire Loop Powered (4-20mA)
  • 3/4" NPT for Conduit Connections
  • Industry Standard 1/4"x 28 UNF Stud Mounting
  • Optional Display
  • UL and CSA Approved Class 1, Division 2, Group B-D
  • CE Approved
  • RoHS Compliant
CMCP420VT Loop-Powered Vibration Transmitter

CMCP420VT-T Dual Parameter Loop-Powered Vibration and Temperature Transmitter CMCP420VT-T Dual Parameter Loop-Powered Vibration and Temperature Transmitter

  • Dual Parameter (Vibration and Temperature)
  • Solid State Reliability
  • 2-Wire Loop Powered (4-20 mA)
  • 3/4" NPT for Conduit Connections
  • Industry Standard 1/4"x 28 UNF Stud Mounting
  • Optional Display
  • UL and CSA Approved Class 1, Division 2, Group B-D
  • CE Approved
  • RoHS Compliant
CMCP420VT Loop-Powered Vibration Transmitter

Top Exit MS 2 Pin 5015 Conenctor Transmitter CMCP422VT-C Series Loop Powered Velocity Transmitter, Top Entry 2 Pin MS Connector

  • 4-20mA Vibration Velocity Sensor
  • 10-1kHz ISO Standard Frequency Range
  • RMS or Peak Detection
  • Top Entry 2 Pin MS Connector
  • Class 1 Division 2 Approved
  • Class 1 Division 1 with Barrier
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +194°F (-25 to 90°C) Temperature Range
  • 1/4" x 28 UNF Mounting Stud

CMCP422VT-C Data Sheet

Top Exit MS 2 Pin 5015 ConnectorTransmitter CMCP422AT-C Series Loop Powered Acceleration Transmitter, Top Entry 2 Pin MS Connector

  • 4-20mA Vibration Acceleration (g's) Sensor
  • 10-5kHz ISO Standard Frequency Range
  • RMS or Peak Detection
  • Top Entry 2 Pin MS Connector
  • Class 1 Division 2 Approved
  • Class 1 Division 1 with Barrier
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +194°F (-25 to 90°C) Temperature Range
  • 1/4" x 28 UNF Mounting Stud

CMCP422AT-C Data Sheet

CMCP423VTA Compact Vibration Switch CMCP423VTA Compact Vibration Switch

  • Low Cost, Compact Vibration Switch
  • 4-20mA and Relay Output
  • Vibration Velocity RMS
  • 1.0 or 2.0 Ranges (25.4 or 50.8mm/sec)
  • 10 to 1kHz Frequency Response
  • Adjustable Alarm Level (0-100% Full Scale)
  • Adjustable Time Delay (0-60 Seconds)
  • Locking Adjustments
  • 4 Pin Eurofast Connector
  • IP67 Rated


Side Exit MS 2 Pin 5015 Connenctor Transmitter CMCP422VTS-C Series Loop Powered Velocity Transmitter, Side Entry 2 Pin MS Connector

  • 4-20mA Vibration Velocity Sensor
  • 10-1kHz ISO Standard Frequency Range
  • RMS or Peak Detection
  • Side Entry 2 Pin MS Connector
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +194°F (-25 to 90°C) Temperature Range
  • 1/4" x 28 UNF Mounting Stud

CMCP422VTS-C Data Sheet

Side Exit MS 2 Pin 5015 Connenctor Transmitter CMCP422ATS-C Series Loop Powered Acceleration (g's) Transmitter, Side Entry 2 Pin MS Connector

  • 4-20mA Vibration Acceleration (g's) Sensor
  • 10-5kHz ISO Standard Frequency Range
  • RMS or Peak Detection
  • Side Entry 2 Pin MS Connector
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +194°F (-25 to 90°C) Temperature Range
  • 1/4" x 28 UNF Mounting Stud

CMCP422ATS-C Data Sheet

Top Exit MS PUR Submersible Accelerometer CMCP422VT-IP Series Loop Powered Velocity Transmitter, Integral Submersible PUR Cable (IP68)

  • 4-20mA Vibration Velocity Sensor
  • 10-1kHz ISO Standard Frequency Range
  • RMS or Peak Detection
  • Top Entry Integral PUR Cable (IP68)
  • Class 1 Division 2 Approved
  • Class 1 Division 1 with Barrier
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +194°F (-25 to 90°C) Temperature Range
  • 1/4" x 28 UNF Mounting Stud

CMCP422VT-IP Data Sheet

Top Exit MS PUR Submersible Accelerometer CMCP422AT-IP Series Loop Powered Acceleration (g's) Transmitter, Integral Submersible PUR Cable (IP68)

  • 4-20mA Vibration Acceleration (g's) Sensor
  • 10-5kHz ISO Standard Frequency Range
  • RMS or Peak Detection
  • Top Entry Integral PUR Cable (IP68)
  • Class 1 Division 2 Approved
  • Class 1 Division 1 with Barrier
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +194°F (-25 to 90°C) Temperature Range
  • 1/4" x 28 UNF Mounting Stud

CMCP422AT-IP Data Sheet

Submersible Vibration Transmitter CMCP422VTS-IP Series Loop Powered Velocity Transmitter, Side Entry Integral Submersible PUR Cable (IP68)

  • 4-20mA Vibration Velocity Sensor
  • 10-1kHz ISO Standard Frequency Range
  • RMS or Peak Detection
  • Side Entry Integral PUR Cable (IP68)
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +194°F (-25 to 90°C) Temperature Range
  • 1/4" x 28 UNF Mounting Stud

CMCP422VTS-IP Data Sheet

Submersible Vibration Transmitter CMCP422ATS-IP Series Loop Powered Acceleration (g's) Transmitter, Side Entry Integral Submersible PUR Cable (IP68)

  • 4-20mA Vibration Acceleration (g's) Sensor
  • 10-5kHz ISO Standard Frequency Range
  • RMS or Peak Detection
  • Side Entry Integral PUR Cable (IP68)
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +194°F (-25 to 90°C) Temperature Range
  • 1/4" x 28 UNF Mounting Stud

CMCP422ATS-IP Data Sheet

Explosion Proof Head CMCP420XPHD Explosion Proof Head for CMCP420VT

Explosion Proof Head for CMCP420VT Loop Powered Transmitter. The CMCP420VT Transmitter equipped with the CMCP420XP Explosion Proof Head will make it rated for Class I Division I areas.

CMCP420VT Loop-Powered Vibration Transmitter

Top Exit M12 Connector Transmitter CMCP422VT-M12 Series Loop Powered Velocity Transmitter, Top Entry M12 Connector

  • 4-20mA Vibration Velocity Sensor
  • 10-1kHz ISO Standard Frequency Range
  • RMS or Peak Detection
  • Top Entry M12 Connector
  • Class 1 Division 2 Approved
  • Class 1 Division 1 with Barrier
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +194°F (-25 to 90°C) Temperature Range
  • 1/4" x 28 UNF Mounting Stud

CMCP422VT-M12 Data Sheet

Top Exit M12 Connector Transmitter CMCP422AT-M12 Series Loop Powered Acceleration (g's) Transmitter, Top Entry M12 Connector

  • 4-20mA Vibration Acceleration (g's) Sensor
  • 10-5kHz ISO Standard Frequency Range
  • RMS or Peak Detection
  • Top Entry M12 Connector
  • Class 1 Division 2 Approved
  • Class 1 Division 1 with Barrier
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +194°F (-25 to 90°C) Temperature Range
  • 1/4" x 28 UNF Mounting Stud

CMCP422AT-M12 Data Sheet

Side Exit M12 Pin 5015 Connenctor Transmitter CMCP422VTS-M12 Series Loop Powered Velocity Transmitter, Side Entry M12 Connector

  • 4-20mA Vibration Velocity Sensor
  • 10-1kHz ISO Standard Frequency Range
  • RMS or Peak Detection
  • Side Entry M12 Connector
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +194°F (-25 to 90°C) Temperature Range
  • 1/4" x 28 UNF Mounting Stud

CMCP422VTS-M12 Data Sheet

Side Exit M12 Pin 5015 Connenctor Transmitter CMCP422ATS-M12 Series Loop Powered Acceleration (g's) Transmitter, Side Entry M12 Connector

  • 4-20mA Vibration Acceleration (g's) Sensor
  • 10-5kHz ISO Standard Frequency Range
  • RMS or Peak Detection
  • Side Entry M12 Connector
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +194°F (-25 to 90°C) Temperature Range
  • 1/4" x 28 UNF Mounting Stud

CMCP422ATS-M12 Data Sheet

Top Exit M12 Connector Transmitter CMCP422VT-I Series Loop Powered Velocity Transmitter, Top Entry Integral Armored Cable (IP65)

  • 4-20mA Vibration Velocity Sensor
  • 10-1kHz ISO Standard Frequency Range
  • RMS or Peak Detection
  • Top Entry Integral Braided Armor Cable
  • Class 1 Division 2 Approved
  • Class 1 Division 1 with Barrier
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +194°F (-25 to 90°C) Temperature Range
  • 1/4" x 28 UNF Mounting Stud

CMCP422VT-I Data Sheet

Top Exit M12 Connector Transmitter CMCP422AT-I Series Loop Powered Acceleration Transmitter, Top Entry Integral Armored Cable (IP65)

  • 4-20mA Vibration Acceleration (g's) Sensor
  • 10-5kHz ISO Standard Frequency Range
  • RMS or Peak Detection
  • Top Entry Integral Braided Armor Cable
  • Class 1 Division 2 Approved
  • Class 1 Division 1 with Barrier
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +194°F (-25 to 90°C) Temperature Range
  • 1/4" x 28 UNF Mounting Stud

CMCP422AT-I Data Sheet

Side Exit MS 2 Pin 5015 Connenctor Transmitter CMCP422VTS-I Series Loop Powered Velocity Transmitter, Side Entry Integral Armored Cable (IP65)

  • 4-20mA Vibration Velocity Sensor
  • 10-1kHz ISO Standard Frequency Range
  • RMS or Peak Detection
  • Side Entry 2 Pin MS Connector
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +194°F (-25 to 90°C) Temperature Range
  • 1/4" x 28 UNF Mounting Stud

CMCP422VTS-C Data Sheet

Side Exit MS 2 Pin 5015 Connenctor Transmitter CMCP422ATS-I Series Loop Powered Acceleration (g's) Transmitter, Side Entry Integral Armored Cable (IP65)

  • 4-20mA Vibration Acceleration (g's) Sensor
  • 10-5kHz ISO Standard Frequency Range
  • RMS or Peak Detection
  • Side Entry 2 Pin MS Connector
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +194°F (-25 to 90°C) Temperature Range
  • 1/4" x 28 UNF Mounting Stud

CMCP422ATS-C Data Sheet

BNC Adapter for Vibration Transmitter CMCP420BNC BNC Adapter for CMCP420VT

90 Degree 3/4” NPT conduit elbow with a BNC connector to access the raw acceleration signal. This is useful for connection to portable data collectors.

CMCP420BNC Data Sheet


3/4" Conduit Elbow CMCP420EL 90 Degree 3/4" x 3/4" NPT Elbow for CMCP420VT

Accessory for the CMCP420VT Series Vibration Transmitters
Useful for connecting CMCP420VT to hard or flexible conduit. When used with the CMCP420-WF, provides a simple weatherproof exit for the instrument wire.

CMCP420EL Data Sheet

Display for CMCP-420VT CMCP420LED/LCD Display

The display for the CMCP420VT is a loop powered display that shows the actual vibration levels in velocity on an easy to read LCD or LED display. The display also includes a BNC connector that provides access to the raw acceleration signal. This is useful for connection to portable data collectors. The temperature readout is designed for use with the CMCP420VT-T Dual Parameter Vibration and Temperature Transmitter. The temperature display does not include a BNC output.

CMCP420VT Loop-Powered Vibration Transmitter

3/4" NPT Weatherproof Cable Gland CMCP420WF 3/4" NPT Weatherproof Cable Fitting for CMCP420VT

The CMCP420WF Waterproof Cable Fitting when used with the CMCP420LED, CMCP420BNC or CMCP420EL provides a waterproof instrument wire exit.

CMCP420VT Accessories

Display and Relay Module for Voltage or Current Output Sensors CMCP730D Relay and Display Module

  • Universal Display and Relay Module
  • Accepts Voltage, Current, RTD or Thermocouple Inputs
  • Compatible with any 4-20mA Sensor or Transmitter
  • Local LCD Display
  • Local Alert and Danger Indicators
  • 4-20mA or Voltage Output
  • Two Relay Outputs
  • Latching or Non-Latching Relays
  • Adjustable Time Delay

CMCP730D Datasheet

CMCP420VT/Ex IECEx/ATEX Approved Loop-Powered Vibration Velocity Transmitter with Dynamic Output CMCP420VT/Ex IECEx/ATEX Approved Loop-Powered Vibration Velocity Transmitter with Dynamic Output

  • IECEx and ATEX Approved (Exd)
  • 4-20mA Velocity Output
  • 100mV/g Dynamic Output
  • 2 to 2,000 Hz (120 to 120kcpm)
  • Two Ranges Available
  • Flameproof Connection Head Included
  • RoHS Compliant
CMCP420VT/Ex Datasheet

CMCP420VT-T/Ex IECEx/ATEX Approved 4-20mA Dual Output Vibration and Temperature Output CMCP420VT-T/Ex IECEx/ATEX Approved 4-20mA Dual Output Vibration and Temperature Output

  • IECEx and ATEX Approved (Exd)
  • Dual Output Vibration and Temperature
  • 4-20mA Velocity Output
  • 4-20mA Temperature Output
  • 2 to 2,000 Hz (120 to 120kcpm)
  • Two Ranges Available
  • Flameproof Connection Head Included
  • RoHS Compliant
CMCP420VT-T/Ex Datasheet

   
 
1