Side Exit General Purpose Accelerometer

Home > Accelerometers > General Purpose >

CMCP785A General Purpose, Side Exit

Alternative Views:

MSRP: (Log in to view)

Product Code: CMCP785A

Thread Size

Description

Technical Specs

Features

General Purpose Side Entry Accelerometer
100 mV/g ±10% Sensitivity
284 °F (140 °C) Maximum Temperature
±80 g Dynamic Range
2 Pin MS 5015 Connector or choice of M12 Connector or Integral Cable
Class 1 Division 2 Approved
Class 1 Division 1 Approved with IS Barrier or Isolator
¼”-28 UNF or M8x1.25 Captive Mounting Bolt
Sealed to IP68
Lifetime Warranty

The CMCP785A Side Exit General Purpose Accelerometer is the most common choice when it comes to monitoring different types of rotating equipment. The CMCP785A's side exit requires less clearance and accommodates a flush installation. The sensor is lightweight and can be use for route based or permanent mount applications. The sensor is designed so that cross wiring will not harm the internal components and provides protection against ground loops. The CMCP785A is waterproof and can be hosed down or submersed when using the proper extension cable such as the CMCP602 series. Additional sensitivities such as 10 mV/g, 30 mV/g, 50 mV/g, 250 mV/g and 500 mV/g are also available in the same sensor package and can be ordered by adding the sensitivity after the base part number. Contact STI for more details.