AMS 3000 Pro Position and Vibration Monitor A3000

The AMS 3000 Pro, originallySTI's CMCP7504 Four Channel Machinery Monitoring System, is a Four-Channel Position & Vibration Monitor designed for small and low channel applications such as small steam, gas, and hydro turbines, compressors, pumps and fans to measure position or vibration signals. Measurement settings, alarms and provided outputs are field configurable via software. When ordered, STI will provide the CMCP7504 branded monitoring system (blue front label) with STI's configuration program.

AMS 3000 Part ID	CMCP7504 Part ID	Input 1	Input 2	Input 3	Input 4
A3000-AA-AA-AA-AA	CMCP7504-AA-AA-AA-AA	Acceleration	Acceleration	Acceleration	Acceleration
A3000-AA-AA-AV-AV	CMCP7504-AA-AA-AV-AV	Acceleration	Acceleration	Velocity	Velocity
A3000-AA-AA-SV-SV	CMCP7504-AA-AA-SV-SV	Acceleration	Acceleration	Seismic Velocity	Seismic Velocity
A3000-DS-DS-DS-DS	CMCP7504-DS-DS-DS-DS	Displacement	Displacement	Displacement	Displacement
A3000-DS-DS-SV-SV	CMCP7504-DS-DS-SV-SV	Displacement	Displacement	Seismic Velocity	Seismic Velocity
A3000-DS-DS-TP-TP	CMCP7504-DS-DS-TP-TP	Displacement	Displacement	Thrust Position	Thrust Position

Input Signal Types:
Acceleration (AA): 100mV/g or 500mV/g IEPE Accelerometer
Velocity (AV): 100mV/g or 500mV/g IEPE Accelerometer
Displacement (DS): 100mV/mil or 200mV/mil Proximity Probe
Seismic Velocity (SV): 28.5mV/mm/s, 22mV/mm/s or 16.7 to 17.5mV/mm/s Electromechanical Velocity Sensor
Thrust Position (TP): 100mV/mil or 200mV/mil Proximity Probe

Other Input Modules Available, Contact STI for More Information

Additional Details
The CMCP7504 is capable of monitoring in Velocity, Acceleration, Enveloped Acceleration (gE), Displacement and Thrust Position with Peak, RMS or Peak to Peak detection. Each input is accompanied by an isolated 4-20 mA output, voltage output, alert relay output, danger relay output and two (2) buffered raw signal outputs.

The front mounted BNC buffered outputs allow access to the sensors raw unprocessed signal with a portable vibration analyzer while the analog outputs provide continuous communication facilitating PLC, DCS or SCADA systems. A Modbus TCP/IP output is available at the terminal strip.

Features

• Continuous Monitoring for Machine Protection
• 4 Variable Inputs Plus Speed and Temperature
• Local Bar Graph Display with Alarm Indicators
• 2 Levels of Alarm Per Channel (Alert and Danger)
• System OK Alarm
• Four Configurable 4-20mA Outputs
• Modbus TCP/IP and RS485
• DataView Signal Saver for Remote Viewing of FFT and Time Waveforms
• Two Buffered Outputs per Channel (BNC Buffered and Screw Terminal)
• API 670 Compliant
• IP65 Housing with Cord Grips
• AC or DC Powered

Available Input Modules:

• AC (Acceleration, Input from Accelerometer)
• VA (Velocity, Input from Accelerometer)
• VV (Velocity, Input from Velocity Transducer)
• EV (Enveloped Acceleration, Input from Accelerometer)
• DS (Displacement, Input from Proximity Probe)
• TP (Thrust Position, Input from Proximity Probe)
• AM (Analog, Input mA or VDC Output Transmitter)
• TM (Temperature Input, 100 Ohm Plat. RTD or 10mV/Deg C)

For more than three decades, STI Vibration Monitoring has established itself as the leading provider of vibration monitoring and machine protection systems. Fueled by a profound dedication to our craft, we strive to offer budget-friendly solutions in today's highly competitive landscape. All our products are meticulously created in the USA, with production facilities in Texas and Nevada. Uncover our wide array of products, confidently place your order today, and rest assured with our extensive warranty coverage.