Home > Cables and Adapters > Standard MS 5015 Cables >

CMCP603H High Temperature 3-Pin Accelerometer Cables
Accelerometer Extension Cable


 
US MSRP: $75.00


Product Code: CMCP603H

Connector Type


CMCP603H Length


Armor


CMCP600 Cable End



Description
 
  • 3 Pin MIL Spec Connector
  • Shielded, Twisted, 20 AWG
  • Teflon Cable (200 degrees C)
  • Water Tight Connector Backshell
3 Pin MIL Spec Connector shielded, Twisted, 20 AWG Teflon® Cable Temperature rated to 392º F / 200º C Water Tight Connector Backshell

The CMCP603H High Temperature Extension Cables are designed to work with all Accelerometers using a 2-pin MIL Spec 5015 connector. The cables utilize an environmental designed MIL Spec. Connector with a positive seal “0” ring that mates with the MIL-C-5015 connector found on most accelerometers. Connector backshells are fully potted and designed to be water tight. 20 AWG cable is twisted and shielded for EMI and RFI protection.

The CMCP603H cables are available in three standard lengths of 16’, 32’ and 64’. Any length desired may be specified and ordered as an option. The Teflon coated wire is 0.200" in diameter. The cable connectors are rated to 125º C (257º F) and the Teflon® cable wire is rated to 200º C (392º F). The cable is well suited to handle temperatures associated with installation near steam piping, manifolds, etc.


Browse for more products in the same category as this item:

Cables and Adapters > Standard MS 5015 Cables