The CMCP785T-I General Purpose Accelerometer with Temperature Output, Side Exit and Integral Cable is the ideal accelerometer for on most types of rotating equipment. The CMCP785T-I is lightweight and can be used for permanent mount applications. The sensor is designed so that cross wiring will not harm the internal components and provides protection against ground loops. The CMCP785T is rated IP65 and should not be submersed. See CMCP785T-IP for an submersible accelerometer. Additional sensitivities such as 10 mV/g, 30 mV/g, 50 mV/g, 250 mV/g and 500 mV/g are also available in the same sensor package and can be ordered by adding the sensitivity after the base part number. Contact STI for more details.
Features:
Sensitivity: 100 mV/g ±10%
Temperature Output: 10 mV/°C (0-1 VDC)
Frequency Response (±3dB): 0.8 Hz to 12 kHz (48 to 720k CPM)
Dynamic Range: ±80 g, peak
Settling Time: 1.5 Seconds
Mounting: 1/4"-28 UNF or M8x1.25 Captive Bolt
Power Requirements: 18-30 VDC
Temperature Range: -67 to 284°F (-55 to 140°C)
Case Material: 316L Stainless Steel
Connector: Integral Cable, Stainless Steel Overbraid
