Home > Transmitters and Monitors > 4-20 mA Sensors >

CMCP422AT-I Series Loop Powered Acceleration Transmitter, Top Entry Integral Armored Cable (IP65)
Top Exit Transmitter with Integral Braided Armored Cable


 
CMCP422AT-I Data Sheet

MSRP: (Log in to view)

Availability: Usually Ships in 24 to 48 Hours
Product Code: CMCP422AT-I

422 Series Range


Signal Detection


Cable Length



Description Technical Specs
 
Typical Applications
Fans, Motors, Pumps, Compressors, Centrifuges, Conveyors, Air Handlers, Gearboxes, Rolls, Dryers, Presses, Cooling, HVAC, Spindles, Machine Tooling, Process Equipment and many more.


  • Loop Powered
  • Acceleration (g's) Output (Standard 10 Hz to 5.0 kHz)
  • RMS or Peak Detection
  • Top Entry, Integral Braided Armor Cable
  • Class 1 Division 2 Approved
  • Class 1 Division 1 with Barrier
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +248 F (-25 to +120 C) Temperature Range
  • 1/4" x 28 UNF Mounting Stud Included
The CMCP422AT-I Series are loop powered 4-20 mA output sensors which are capable of interfacing directly to an analog input card on a PLC or DCS system. The 4-2 0mA output is proportional to the full scale range in terms of Acceleration (g's) and are capable of transmitting signals over a long distance without signal loss. The CMCP422AT-I features an integral braided armor cable rated for IP65.

CMCP422AT-I Data Sheet


Accessories
CMCP602L Series 2 Socket MS Connector with Locking Collar (IP68)

Add
Accelerometer Extension Cable
CMCP203 NPT Pipe Thread Accelerometer Mounting Adapter

Add
NPT Accelerometer Mounting Adapters
CMCP205 Accelerometer Motor Fin Mounts

Add
Motor Fin Mounts for Accelerometers
CMCP200 Accelerometer Mounting Pads

Add
Accelerometer Mounting Discs
CMCP210 Acrylic Adhesive Bypacs For Accelerometer Mounting

Add
Acrylic Adhesive for Accelerometer Mounting

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Transmitters and Monitors > 4-20 mA Sensors
Accelerometers > 4-20mA Output > Acceleration Output (g's)