Navigate to the STI Vibration Monitoring Inc. homepage

You are here:Home
CMCP5301 Machine Monitoring Solution Kit
CMCP5301 Machine Monitoring Solution Kit - Image 1 of 0
CMCP5301 Machine Monitoring Solution Kit - Image 2 of 0
CMCP5301 Machine Monitoring Solution Kit - Image 3 of 0
CMCP5301 Machine Monitoring Solution Kit - Image 1 of 0
CMCP5301 Machine Monitoring Solution Kit - Image 2 of 0
CMCP5301 Machine Monitoring Solution Kit - Image 3 of 0
CMCP5301 Machine Monitoring Solution Kit - Image 4 of 0
CMCP5301 Machine Monitoring Solution Kit - Image 1 of 0
CMCP5301 Machine Monitoring Solution Kit - Image 2 of 0
CMCP5301 Machine Monitoring Solution Kit - Image 3 of 0
CMCP5301 Machine Monitoring Solution Kit - Image 4 of 0

CMCP5301K One Channel Protection System Solution Kit

STI
$
CMCP5301K Comlete Protection Kit
Choose your options:
Display Type
Display Options:
Units
Units:
Enclosure Type
Enclosure Type:
Mounting Kit
Mounting Kit:
Product Code: CMCP5301K
  • Starting at $1,700.00
  • Complete Solution Kit Includes Monitoring System, Sensor and Cable
  • Single Channel Input for Continuous Machine Protection Monitoring
  • Cost Effective Solution Compared to Rack Based Systems
  • Meets API 670 Outlining Machinery Protection Systems
  • Two Levels of Adjustable Alarm with Relays
  • True “OK” Circuitry with Relay
  • Adjustable Alarm Time Delays
  • Trip Multiply for Start Ups and Coast Downs
  • 4-20mA Output per Channel
  • Buffered Transducer Output
  • Common Reset Button
  • Class 1 Division 2 Rated Monitors

The CMCP5301K is a complete packaged solution for providing a real time protection system on rotating machinery. The system comes complete with a Vibration Velocity Monitor, 100mV/g Accelerometer and 32' (10m) Accelerometer Extension Cable. A 4-20mA output is provided with each monitor to allow PLC or DCS connections. Each monitor has its own independent OK, Alert and Danger relays that can be connected to a machine control system or notification system. An optional sensor accessory kit is available to prepare the surface for mounting the accelerometer.


CMCP5301K Comlete Protection Kit
Monitoring System:
Electrical Specifications:

Sensor Inputs: 1 (100mV/g accelerometer included with kit)
Power: Accepts 110 VAC or 220 VAC, 60 or 50 Hz
Frequency Response: (-3 dB) 2 Hz to 20 kHz.
Buffered Output: BNC Connector 0-20 kHz.
Accuracy: 5.0 % of Full Scale Range.
Output: 4-20 mA proportional to the full scale range.
Maximum Load: 600 Ohms Resistive per channel

Sensor and Cable:
Sensor Type: 100mV/g ICP Accelerometer
Cable Length: 32' (10m)

Environmental Specifications:
Operating Temp.: -20oC to +80oC (-4oF to +176oF).
Storage Temp.: -55oC to +125oC (-67oF to +257oF).
Relative Humidity: 0 - 95% Non-Condensing.
Approvals: NEMA 4X, NEMA 4, IP66

Additional Information:
Vibration Monitor Part Number: CMCP530A-100A-02R
Pre-Packaged Enclosure Part Number: CMCP5301 Series
Sensor Part Number: CMCP770A
Cable Part Number: CMCP602L-32-01-01

The CMCP5300K Series Monitoring Systems are one, two, four and six channel Vibration Monitoring Protection System Kits that have been designed for use on typical rotating machinery such as motors, pumps fans, turbines, compressors, chillers, etc. The CMCP5300K Series accepts inputs from the supplied 100 mV/g accelerometers, conditions the input signals to velocity and provides a digital display and alarm status indication.

Analog outputs (4-20 mA) are provided for each channel for interface to a PLC or DCS for trending, alarm and operator interface. The alarm contacts for the OK circuit, and Alert and Danger may be interfaced to machine control and shutdown systems for a complete vibration protection solution. A BNC Buffered Output Connector is available on each monitor to provide a connection for further fault analysis with a vibration data collector, such as SKF's Microlog. The system is a pre-wired turn-key package with power supply, and bright LED displays. The power supply accepts 110 or 220 VAC, 50 or 60 Hz. They are available in either an English or Metric configuration.

The CMCP5300K Series Monitoring Systems come standard with STI’s CMCP530A-100A-02R but are also available with any other CMCP500 Series Monitors, please contact STI for more information. CMCP770A General Purpose Accelerometers and CMCP602L-32-01-01 Cables are also included. The enclosure is available in NEMA 4X Fiberglass, NEMA 4 Painted Steel and NEMA 4X Stainless Steel. An optional sensor installation kit is available to assist in installing the sensors.

Get access to the latest deals and more!