- Four Channel (4 Sensor Inputs) Monitoring Protection System
- Low Cost
- Meets API 670
- Two Levels of Alarm with Relays per Channel
- True “OK” Circuitry with Relay per Channel
- Adjustable Time Delays per Channel
- Trip Multiply per Channel
- 4-20mA Output per Channel
- Buffered Transducer Output per Channel
- Reset Button
- Optional Bright LED Digital Readout
- 100mV/g ICP Accelerometer Input
- Class 1 Division 2 Rated Monitors
The CMCP5304 Series Monitoring and Protection Systems are complete pre-packaged solutions for
all types of rotating machinery. STI’s CMCP500A Series Single Channel Vibration
and Temperature Monitors allow you to create a custom system for your exact
application. By using single channel transmitters the exact amount of
measurement points can be monitored, significantly lowering the cost compared
to “rack” based systems that come with a minimum channel amount per card. The
CMCP5304 Series Monitoring Systems are designed to be used with the
CMCP530A-100A Vibration Velocity Monitor but can be retrofitted for use with
any other CMCP500A Series Monitors, whether your application calls for
proximity probes, accelerometers, RTD’s, thermocouples or any other industry
standard sensor STI can retrofit the CMCP5304 to accommodate your needs. Other
enclosure types are available for systems that require more than 6 channels.
STI’s Custom Products Division can also provide custom built systems around
your requirements.
Electrical Specifications:
Sensor Inputs: 4
Power: Accepts 110 VAC or 220 VAC, 60 or 50 Hz
Frequency Response: (-3 dB) 2 Hz to 20 kHz.
Buffered Output: BNC Connector 0-20 kHz.
Accuracy: 5.0 % of Full Scale Range.
Output: 4-20 mA proportional to the full scale range.
Maximum Load: 600 Ohms Resistive per channel
Case: Isolated.
Environmental Specifications:
Operating Temp.: -20oC to +80oC (-4oF to +176oF).
Storage Temp.: -55oC to +125oC (-67oF to +257oF).
Relative Humidity: 0 - 95% Non-Condensing.
Approvals: NEMA 4X, NEMA 4, IP66
Dimensions:
CMCP5301 and CMCP5302
Fiberglass (FG): 9.2”H x 11.20”W x 6.1” D
Painted Steel (PS): 9.85”H x 11.8”W x 5.9”D
Stainless Steel: (SS) 9.85”H x 11.8”W x 5.9”D
CMCP5304
Fiberglass (FG): 11.2”H x 13.21”W x 6.5”D
Painted Steel (PS): 9.85”H x 11.8”W x 5.9”D
Stainless Steel (SS): 9.85”H x 11.8”W x 5.9”D
The CMCP5300 Series Monitoring Systems are one, two, four and six channel Vibration Monitors that have been designed for use on typical rotating machinery such as motors, pumps fans, turbines, compressors, chillers, etc. The CMCP5300 Series accepts inputs from any industry standard 100 mV/g accelerometer, conditions the input signals to velocity and provides a digital display and alarm status indication.
Analog outputs (4-20 mA) are provided for each channel for interface to a PLC or DCS for trending, alarm and operator interface. The alarm contacts for the OK circuit, and Alert and Danger may be interfaced to machine control and shutdown systems for a complete vibration protection solution. A BNC Buffered Output Connector is available on each monitor to provide a connection for further fault analysis with a vibration data collector, such as SKF's Microlog. The system is a pre-wired turn-key package with power supply, and bright LED displays. The power supply accepts 110 or 220 VAC, 50 or 60 Hz. They are available in either an English or Metric configuration.
The CMCP5300 Series Monitoring Systems come standard with STI’s CMCP530A-100A-02R but are also available with any other CMCP500 Series Monitors, please contact STI to specify the exact model number. The enclosure is available in NEMA 4X Fiberglass, NEMA 4 Painted Steel and NEMA 4X Stainless Steel.
For wiring diagrams or mounting instructions please see the CMCP500 series manual and quick start guide. The CMCP5300 Series Monitors provide a standard pre-packaged system for STI’s CMCP500 Series Transmitter and Monitors.
|
