Home > Monitoring Systems >

CMCP7504 Four Channel Machinery Monitoring System
CMCP7504 Four Channel Machinery Monitoring System

Alternative Views:

CMCP7500MMS DatasheetCMCP7504

MSRP: (Log in to view)

Product Code: CMCP7504

Input Module 1*:

Input Module 2*:

Input Module 3*:

Input Module 4*:

Description Extended Information
  • Continuous Monitoring for Machine Protection
  • 4 Variable Inputs Plus Speed and Temperature
  • Local Bar Graph Display with Alarm Indicators
  • 3 Levels of Alarm Per Channel
  • Four Configurable 4-20 mA Recorder Outputs
  • Modbus TCP/IP Output
  • DataView Signal Saver
  • Two Buffered Outputs per Channel (Local BNC Buffered Outputs for Portable Analyzer and Terminal for On-line Systems)
  • API 670 Compliant
  • Individual OK, Alert and Danger Relay Outputs
  • IP65 Housing with Cord Grips
  • AC or DC Powered
The CMCP7504 Four Channel Machinery Monitoring System is a four channel API 670 compliant continuous monitoring system for use with Proximity Probes, Accelerometers, Velocity Transducers, and Analog Output sensors. In addition, the system also allows for a single temperature and speed input for readout and visual alarming.
The CMCP7504 is capable of monitoring in Velocity, Acceleration, Enveloped Acceleration (gE), Displacement and Thrust Position with Peak, RMS or Peak to Peak detection. Each input is accompanied by an isolated 4-20 mA output, voltage output, alert relay output, danger relay output and two (2) buffered raw signal outputs.
The front mounted BNC buffered outputs allow access to the sensors raw unprocessed signal with a portable vibration analyzer while the analog outputs provide continuous communication facilitating PLC, DCS or SCADA systems. A Modbus TCP/IP output is available at the terminal strip.

The CMCP7504 features a 4.3" LCD display which provides easy to read bar graphs for the overall vibration value and alarm indicators. The CMCP7504 housing is rated for IP65 and can be installed in a separate housing for further environmental protection.

Available Input Modules:

AC (Acceleration, Input from Accelerometer)
VA (Velocity, Input from Accelerometer)
VV (Velocity, Input from Velocity Transducer)
EV (Enveloped Acceleration, Input from Accelerometer)
DS (Displacement, Input from Proximity Probe)
TP (Thrust Position, Input from Proximity Probe)
AM (Analog, Input mA or VDC Output Transmitter)
TM (Temperature Input, 100 Ohm Plat. RTD or 10mV/Deg C)

CMCP7500MMS DatasheetCMCP7504

CMCP7500 Series Setup Application

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Monitoring Systems
New Products