Side Exit Velocity Transducer

Home > Accelerometers > Piezo-Velocity >

CMCP797V Velocity Transducer, Side Exit

CMCP797V Side Exit Piezoelectric Velocity Sensor

MSRP: (Log in to view)

Product Code: CMCP797V

Description

The CMCP797V Side Exit Piezoelectric Velocity Sensor are measurement devices that are used to examine vibration signals in terms of velocity (in/sec) and to amplify the signal of interest. The CMCP797V inherently decreases high frequency signals allowing better measurement of low frequency vibration. The CMCP797V sensor is essentially an accelerometer with an internal integration circuit which will produce an output relative to velocity. The CMCP797V is the ideal accelerometer for on most types of rotating equipment. The CMCP797V is lightweight and can be use for magnet or permanent mount applications. The sensor is designed so that cross wiring will not harm the internal components and provides protection against ground loops. The CMCP797V is waterproof and can be hosed down or submersed when using the proper extension cable such as the CMCP602 series.

See datasheet for additional details.
Note: For a 500 mV/in/sec sensitivity, please select the CMCP793V-500 with top exit.

Features:
Sensitivity: 100mV/in/sec ±10%
Frequency Response (±3dB): 2 Hz to 6 kHz (120 to 360k CPM)
Dynamic Range: ±40 In/Sec
Mounting: 1/4"-28 UNF or M8x1.25 Captive Bolt
Power Requirements: 18-30 VDC
Temperature Range: -67 to +284 °F (-55 to +140 °C)
Case Material: 316L Stainless Steel
Connector: 2 Pin MIL-C-5015
Approvals: CSA/UL Class I Division II Approved, Groups B, C,D