Navigate to the STI Vibration Monitoring Inc. homepage

You are here:Home > Vibration Switches
CMCP-DVS-GP Digital Vibration Switch
CMCP-DVS-GP Digital Vibration Switch - Image 1 of 0
CMCP-DVS-GP Digital Vibration Switch - Image 2 of 0
CMCP-DVS-GP Digital Vibration Switch - Image 3 of 0
CMCP-DVS-GP Digital Vibration Switch - Image 1 of 0
CMCP-DVS-GP Digital Vibration Switch - Image 2 of 0
CMCP-DVS-GP Digital Vibration Switch - Image 3 of 0
CMCP-DVS-GP Digital Vibration Switch - Image 4 of 0
CMCP-DVS-GP Digital Vibration Switch - Image 1 of 0
CMCP-DVS-GP Digital Vibration Switch - Image 2 of 0
CMCP-DVS-GP Digital Vibration Switch - Image 3 of 0
CMCP-DVS-GP Digital Vibration Switch - Image 4 of 0

CMCP-DVS-GP Digital Vibration Switch, General Purpose w/External Reset Switch

$
Choose your options:
Measurement Range:
Product Code: CMCP-DVS-GP
Features
  • Rugged Enclosure, Rated IP68
  • External Reset Switch Included
  • Programmable
  • 2 to 2,000 Hz
  • 2 levels of Alarm
  • Red 0.5” LED Display
  • 5 Amp 230 VAC Relays
  • Programmable Time Delay
  • Latching or Non Latching Alarms
  • Internal IEPE Accelerometer
  • True RMS Velocity
The CMCP-DVS-GP is a single channel microprocessor-controlled vibration switch with two (2) alarm levels with associated relays. Alarm levels are completely programmable and can be either latching or non-latching. It shows the current vibration on a good visible LED Display along with LED alarm indicators. The Sensor module is mounted in the bottom of the housing uses a 100 mV/g Standard Accelerometer and converts the signal to True RMS Velocity.
It is designed to be mounted directly to rotating machinery and prevent catastrophic failure by shutting down the machine when vibration levels become excessive. Alarm time delay is programmable to prevent false shutdowns. The CMCP-DVS-GP General Purpose unit can be deployed on any rotating machinery in many Industries.
For Latching Alarms a reset switch on the front panel keypad is provided. An external switch with NPT fitting is provided for local reset by installing in your choice of the conduit hubs. Terminals are also available internally for wiring to a remote reset switch.
CMCP-DVS-GP Vibration Switch CMCP-DVS Manual

Get access to the latest deals and more!