Navigate to the STI Vibration Monitoring Inc. homepage

You are here:Home > Monitoring Systems
CMCP-HR4VT Four Channel High Read Monitoring System
CMCP-HR4VT Four Channel High Read Monitoring System - Image 1 of 0
CMCP-HR4VT Four Channel High Read Monitoring System - Video 2 of 1
CMCP-HR4VT Four Channel High Read Monitoring System - Image 1 of 0
CMCP-HR4VT Four Channel High Read Monitoring System - Video 2 of 1
CMCP-HR4VT Four Channel High Read Monitoring System - Image 1 of 0
CMCP-HR4VT Four Channel High Read Monitoring System - Video 2 of 1

CMCP-HR4VT Four Channel High Read Monitoring System

STI
$0.00
CMCP-HR4VT Data Sheet
Choose your options:
Cable Glands:
Enclosure Type
Enclosure Type:
Product Code: CMCP-HR4VT
Designed as a low-cost full-time monitoring system for up to four 4-20 mA Vibration Sensors. Monitor and view the highest Vibration reading with the CMCP730D Alarm and Display Module.

  • For Four 4-20 mA Sensors (Selectable)
  • Alarm and Display Module (Alert and Danger)
  • +24 VDC Power Suppl
  • Fiberglass or Stainless-Steel Enclosure
  • High Read Output (1-5VDC
  • Auxiliary Terminals for Second Loop Device
  • Power On Green LE
  • Din Rail Mounted
  • Optional Modbus TPC Connection
The CMCP-HR4VT takes four 4-20 mA Inputs and converts the Inputs to 1.0 to 5.0 VDC Outputs with the highest available on the High Read Output. Any of the 4 Channels can be selected to output on the Alarm Display or if selector is left in the HR position the highest of the 4 will be outputted. The CMCP730D Alarm and Display Module shows the actual engineering units at a glance.
The low-cost on-line monitoring system accommodates up to four 4-20 mA Velocity Sensors, a single CMCP-HR4, a CCP515-0625 Power Supply and a CMCP730D Alarm and Display Module. A second CMCP-HR4T and CMCP730D can be added for 4-20 mA Dual Parameter Sensor Temperature Outputs (CMCP420VT or CMCP422VTT).

CMCP-HR4VT
Technical Performance
Supply Voltage: +24 VDC Nominal (16 to 30 VDC), 21 mA24
Terminals: 2 Terminals, +24 VDC In and Common
16 Terminals, 2x for each Loop, 2x Auxiliary Outputs for PLC/DCS (x 4 Channels)
4 Terminals for +24 VDC Power Out
2 Terminals to CMCP730D (Signal and Common)

DIP Switch for Source (20 mA) or Sink (0.0 mA)
4-20 mA outputs to 250 Ohm resistor for 1-5.0 VDC output.

Switch HR-Position: Combined Outputs for High Read
Switch 1-4 Position: Output of Respective Individual Loop

Green LED: ‘On’ Indication
Specifications
Mounting: DIN Rail (35 mm)
Size: 2.07” Wide x 3.89” High x 3.0” Deep (52.5mm x 98,8mm x 79.2mm)
Terminals: Screw Type Terminals with Pressure Plate
Wire Size: 22-14 AWG (Smaller Wire uses Ferrules)
Weight: 0.5 Lbs. (0.227kg)
Flammability: Enclosure UL94 V-O
Material: Glass Filled Polycarbonate
Color: Light Gray, Blue Panel
Input: Up to four 4-20 mA Output Sensors
Output: High Read Signal or switch selected 4-20 mA loop

Designed as the base unit for a low-cost full-time monitoring system for up to four 4-20 mA Vibration Sensors.
Monitor and view the highest Vibration reading by connecting the CMCP730D Alarm and Display Module.
The CMCP-HR4 takes four 4-20 mA Inputs and either Source (supplying power) or Sink (passive). It converts the Inputs to 1.0 to 5.0 VDC Outputs with the highest available on the High Read Output. Any of the 4 Channels can be selected to output on the HR Terminal or if selector is left in the HR position the highest of the 4 will be outputted. When used with a CMCP730D Alarm and Display Module the actual engineering units can be viewed.

A low-cost on-line monitoring system can be easily put together using up to four 4-20 mA Velocity Sensors, a single CMCP-HR4, and a CMCP730D Alarm and Display Module. A second CMCP-HR4 and CMCP730D can be added for 4-20 mA Dual Parameter Sensor Temperature Outputs.

Get access to the latest deals and more!