CMCP-TACH3 Tachometer

Choose your options:

Power

Power:

[-AC] 100-240 VAC Power Input

[-DC] 24 VDC Power Input

CMCP-TACH3 Sensor

CMCP-TACH3 Sensor(required):

[-00] Standard

[-EP] Proximity (Eddy) Probe

Programming Cable

Programming Cable:

[-00] Without Programming Cable

[-01] With USB Programming Cable and Software

Product Code: CMCP-TACH3

Qty:

Features

Universal Input
Panel Mount
5-999,999 RPM Range
1 or Multiple pulses per revolution
4-20 mA Output
RS-232 Output
Alarm Outputs
0.56" H, Seven Segment LED
High & Low RPM Recall
Optional Proximity Probe Input

The CMCP-TACH3 is front panel programmable for single or multiple pulses per revolution and scaling. It may be used as Tachometer, Rate-meter, Counter, or a Totalizer. The tachometer also offers Rate Of Acceleration. The CMCP-TACH3 offers a fixed or floating decimal point and can be supplied with Remote Optical, Infrared, Laser, Proximity, and Magnetic Sensors. It is directly compatible with a TTL input and a 200 mV to 50 Vac signal. The TACH3 has front panel programmable set points, analog voltage and current, TTL and RS232 outputs. The TACH3 can be modified to accept a -24 Vdc Eddy Current Probe input. The TACH3 offers more standard features than any other tachometer available.

At STI Vibration Monitoring, our selection of speed sensors and tachometers features the CMCP-TACH3 Tachometer, designed for versatility with its capability to handle single or multiple pulses per revolution, along with convenient front-panel programmability. As leaders in vibration monitoring and machine protection systems, we manufacture our products to the highest standards in the United States. Since 1989, we have been dedicated to providing our customers with high-quality equipment, and we take pride in being known for offering the best warranties in the industry.

1/8 DIN sized
5 Digit LED display
5 to 999,990 RPM range
Universal sensor inputs
N.I.S.T. Traceable Certificate of Calibration included
User configurable with front panel push buttons or Optional PM Remote Software
View real-time data on PC*
Store data in Excel File in real-time*
Universal A/C power 100 to 240 Vac, 50/60Hz or optional 12 or 24Vdc power
Standard pulse repeater output
Single event capture from start and stop pulses, in units such as MPH, CM/sec, etc. using two sensors - for linear rate of travel on second input channel
Optional 4-20mA or 0-5Vdc scalable output
Optional Ethernet or USB communications
Optional alarm relay outputs

*Requires optional USB programming cable and PM Remote Software

CMCP-TACH-3 Specifications

Speed Range:	5 to 999,990 RPM (single pulse per revolution), 0.5 to 999,990 RPM (10 pulses per revolution). Speeds below 5 RPM are possible with multiple pulses per revolution
Input Frequency Range:	0.083 Hz to 250 kHz
Totalizer/Counter:	Display Range: 0.001 to 99,999 (Only top 5 digits are shown for 100,000-999,990) Max # of counts = 16,777,216 even with 0.001 scale
Input Configuration:	Universal Inputs: 1 to 9,999 pulses per revolution, front panel push button programmable TTL input and 1.1V to 50vac signals, Opt: -1 to – 50Vdc
Accuracy:	±0.001% of reading or ±1 displayed resolution (Standard Gate), ±0.01% of reading or ±1 displayed resolution (Fast Gate).
Resolution:	Up to 0.001 RPM, 10 RPM (100,000 to 999,990 RPM).
Display:	5 digit, 0.56” (14 mm) high red LED.
Display Update:	Menu Selectable between: 0.5 second above 120 RPM, 1 second above 60 RPM and 1.5 seconds above 40 RPM.
Max Measurement Rate:	Up to 100 times per second (Standard Gate) or up to 1000 (Fast Gate) dependent on input frequency. Input must be > measurement rate.
Scaling:	Programmable scaling: 0.0001 to 9999.9 (front panel push button programmable).
Decimal Point:	User Selectable (0-3) decimal places max (front panel push button programmable).
Memory:	Maximum, minimum and last reading recall from front panel push buttons.
Dimensions:	1/8 DIN by 4.5” (114 mm) deep. Panel cutout: 3.58” x 1.74” (91 x 44mm)
Input Power:	Standard: 100 - 240 Vac ±10%, 50/60 Hz Optional: 12 or 24 Vdc ±20%, Isolated, 6.0 Watts.
Inputs:	Universal input for optical, proximity, two wire or three wire magnetic, infrared or laser sensors. TTL input or 1.5 Vac to 50 Vac input. Standard input is 1 pulse per revolution.
Sensor Excitation:	5Vdc or optional 12Vdc or 24Vdc to sensor.
Recommended Sensors:	Optical - Monarch ROS-W, ROS-P-25, ROS-HT-W-25, ROSM-5W Proximity - Monarch P5-11 Magnetic - Monarch M-190W or MT-190W Infrared - Monarch IRS-W Laser - Monarch ROLS-W, SLS-115/230 Inductive - Gas Engine GE-200
Pulse Repeater Output:	Standard, 0 to 5 V TTL compatible. One pulse out for each pulse in. Menu selectable polarity.
Communications:	Bi-directional RS232C, USB or Ethernet interface.
Analog Output:	Voltage (AO): 0 to 5 Vdc, 5mA max load (isolated or non-isolated) or Current (IO): 4 to 20mA, 500Ω max load. (isolated or non-isolated), 1 to 5Vdc possible using 250Ω resistor) 16 bit resolution. Front panel push button programmable for full scale and offset RPM ranges.
Alarm Capability:	Two alarm set points: High or Low alarm limits, Latching or Non-Latching, Front panel push button programmable Hysteresis, dead band and low limit lockout are programmable, Relays can be set as failsafe. Alarms can be reset Manually or Automatically. Remote reset via auxiliary input.
Alarm Outputs:	Two Form C relay contacts, rated 1A at 115Vac or 230Vac
Remote Programming:	Unit can be remotely programmed using optional communications interface and PM Remote Software.
Environmental:	Indoor use only, Installation category II per IEC 664 Temperature: -10°C to 50°C operating per IEC 61010-1 Humidity: Maximum relative humidity 80% for temperatures up to 31°C, decreasing linearly to 50% relative humidity at 40°C.
Electrical Safety:	Meets EN61010-1:2001, EC low voltage directive 72/23/EEC and 89/336/EEC

SEARCH

SEARCH

CMCP-TACH3 Tachometer

Description

Product Details

Downloads

Extended Information

CMCP-TACH-3 Specifications