Navigate to the STI Vibration Monitoring Inc. homepage

Dual Probe
Dual Probe - Image 1 of 0
Dual Probe - Image 2 of 0
Dual Probe - Image 3 of 0
Dual Probe - Image 1 of 0
Dual Probe - Image 2 of 0
Dual Probe - Image 3 of 0
Dual Probe - Image 1 of 0
Dual Probe - Image 2 of 0
Dual Probe - Image 3 of 0

CMCP801DP Dual Probe Holder

$
Choose your options:
CMCP801 Probe Thread
CMCP801 Probe Thread:
Product Code: CMCP801DP
Features
  • Dual Probe Holder
  • Proximity Probe and Velocity Sensor
  • For Measuring Absolute Vibration
  • Stock Insertion Depth 12" (30.48 cm), Field Trimmable
  • 316 Stainless Steel
  • Aluminum Conduit Head
  • 1/4"x28 or 3/8"x24 Threaded Probes
  • 2" of Probe Adjustment
  • Oil Tight (Parker Seal)
  • 3/4" NPT (1/2" Adapter Available)
The CMCP801DP Dual Probe Holder is designed for the external mounting of Proximity (Eddy) Probes as described and recommended by API-670 along with a Accelerometer or Velocity Sensor for Shaft Absolute Vibration Measurements.
External (through the case) mounting allows for the easy removal, inspection, and adjustment of the Proximity Probe as opposed to internal mounting where the bearing cap or cover needs to be removed prior to inspection. The CMCP801 Probe Holder has an adjustment range of plus or minus 1" (2.54 cm), 2" (5.08 cm) overall. The CMCP801 can be cut in the field or by a local machine shop to the required insertion depth.
Additional insertion depth can be added by using longer Proximity Probes. All machined parts of the CMCP801 Probe Holder are made of 316 Stainless Steel. The outlet body and extension are cast aluminum. The outlet body is provided with four (4) 3/4" NPT Hubs and is rated for Class 1 and 2, Division A, B, C and D. As the Probe Holder uses 3/4" NPT entry into the machine case a standoff if required, can easily be constructed using readily available 3/4" pipe and pipe fittings.
Specifications
Outlet Body and Dome Lid: Aluminum Machined Parts: 316 Stainless Steel Machine Entry: 3/4" NPT Conduit Fittings: 3/4" NPT Outlet Body Width: 4.1" (10.4 cm) Max Height Above Machine: 5.75" (14.6 cm) Max Stinger Diameter: 0.5" (1.27 cm) Maximum Length: 12" (30.48 cm) 12.0" Insertion Depth (Max)
Each probe Holder is provided with the following:Outlet Body w/Dome LidClose up Plugs(3) 3/4" NPTProbe Adapter Union 3/4" NPTProbe Holder (Stinger)Jam Nut 1-1/4" Wrench SizeParker Seal
CMCP801DP Data SheetCMCP801DP Manual

Get access to the latest deals and more!