Navigate to the STI Vibration Monitoring Inc. homepage

Liquid Tight Strain Relief
Liquid Tight Strain Relief - Image 1 of 0
Liquid Tight Strain Relief - Image 2 of 0
Liquid Tight Strain Relief - Image 1 of 0
Liquid Tight Strain Relief - Image 2 of 0
Liquid Tight Strain Relief - Image 1 of 0
Liquid Tight Strain Relief - Image 2 of 0

CMCP262 Multi-Hole Strain Relief Connectors

STI
$0.00
CMCP262 Multi-Hole Strain Relief Connector - Datasheet
Choose your options:
CMCP262 Size
CMCP262 Size:
Product Code: CMCP262
Save space and have fewer cutouts in your enclosure by running more than one cord through a single cord grip. Break-Through Cord Grips have a thin, flexible seal that covers the holes until you push cord through them. Made of black nylon and include a zinc-plated steel locknut. Temperature range is -20° to 210° F. Rated IP68 for protection from water submersion. The CMCP262 Series Cord Grips are UL listed and CSA certified.

Specifications:
Material: Nylon Cord Grip with Zinc Plated Steel Washer
IP Rating: IP68
Suitable for Continuous Immersion in Water Beyond 1 Meter
Protected from Ingress of Dust
Temperature Range: -20 to 210°F (-20 to 100°C)
For Cable Diameter: 0.17” to 0.22” (4.3 to 5.58mm)

Cable Inputs:
Part ID Maximum Allowed

CMCP261-01: 5
CMCP261-02: 9
CMCP261-03: 13
CMCP261-04: 21

Knock Out Size:
Cord Grip NPT Size Drill Size
CMCP261-01: 0.75" NPT 1.05”
CMCP261-02: 1.00” NPT 1.32”
CMCP261-03: 1.25” NPT 1.66”
CMCP261-04: 1.50” NPT 1.90”


CMCP262 Multi-Hole Strain Relief Connector - Datasheet
CMCP262-02CMCP262-02


CMCP262-03CMCP262-04


Installation:

  1. Drill or Knockout Opening in Enclosure According to Size Chart
  2. Insert Cord Grip, Secure with Nut Inside Enclosure
  3. Loosen Seal
  4. Firmly press the end of the cable into one of the indentations until the cable goes through the seal.
  5. Repeat step 4 any remaining cable.
  6. Tighten the seal nut until the cables are compressed and cannot be pulled in or out freely by hand.

Get access to the latest deals and more!