You are here: Home > Accelerometers > 4-20mA Output > Acceleration Output (g's)
The loop powered 4-20 mA output sensors are designed to interface directly to an analog input card on a Control System (PLC or DCS). The 4-20 mA output is proportional to the full-scale range in terms of Acceleration and are capable of transmitting signals over a long distance without signal loss. The sensors are available with 2 Pin MS connector, M12 connector or with integral cable with or without armor.
Sort By:
1
Top Exit MS 2 Pin 5015 ConnectorTransmitter CMCP422AT-C Series Loop Powered Acceleration Transmitter, Top Connector

  • 4-20 mA Vibration Acceleration (g's) Sensor
  • 10Hz -5.0 kHz Standard Frequency Range
  • RMS or Peak Detection
  • Top Entry, 2 Pin MS 5015 or 4 Pin M12 Connector
  • Class 1 Division 2 Approved
  • Class 1 Division 1 with Barrier
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +248 °F (-25 to +120 °C) Temperature Range
  • 1/4" x 28 UNF Mounting Stud

CMCP422AT-C Data Sheet

Side Exit MS 2 Pin 5015 Connenctor Transmitter CMCP422ATS-C Series Loop Powered Acceleration (g's) Transmitter, Side Connector

  • 4-20 mA Vibration Acceleration (g's) Sensor
  • 10 Hz to 5.0 kHz Standard Frequency Range
  • RMS or Peak Detection
  • Side Entry, 2 Pin MS 5015 or 4 Pin M12 Connector
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +248 °F (-25 to +120 °C) Temperature Range
  • 1/4" x 28 UNF Captive Bolt

CMCP422ATS-C Data Sheet

Top Exit MS PUR Submersible Accelerometer CMCP422AT-IP Series Loop Powered Acceleration (g's) Transmitter, Integral Submersible PUR Cable (IP68)

  • 4-20 mA Vibration Acceleration (g's) Sensor
  • 10 Hz to 5.0 kHz Standard Frequency Range
  • RMS or Peak Detection
  • Top Entry Integral PUR Cable (Submersible)
  • Class 1 Division 2 Approved
  • Class 1 Division 1 with Barrier
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +248 °F (-25 to +120 °C) Temperature Range
  • 1/4" x 28 UNF Mounting Stud

CMCP422AT-IP Data Sheet

Submersible Vibration Transmitter CMCP422ATS-IP Series Loop Powered Acceleration (g's) Transmitter, Side Entry Integral Submersible PUR Cable (IP68)

  • 4-20 mA Vibration Acceleration (g's) Sensor
  • 10 Hz to 5.0 kHz Standard Frequency Range
  • RMS or Peak Detection
  • Side Entry Integral PUR Cable (Submersible)
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +248 °F (-25 to +120 °C) Temperature Range
  • 1/4" x 28 UNF Captive Bolt

CMCP422ATS-IP Data Sheet

Top Exit Transmitter with Integral Braided Armored Cable CMCP422AT-I Series Loop Powered Acceleration Transmitter, Top Entry Integral Armored Cable (IP65)

  • 4-20 mA Vibration Acceleration (g's) Sensor
  • 10 Hz to 5.0 kHz Standard Frequency Range
  • RMS or Peak Detection
  • Top Entry Integral Braided Armor Cable
  • Class 1 Division 2 Approved
  • Class 1 Division 1 with Barrier
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +248 °F (-25 to +120 °C) Temperature Range
  • 1/4" x 28 UNF Mounting Stud

CMCP422AT-I Data Sheet

Side Exit Transmitter with Integral Braided Armored Cable CMCP422ATS-I Series Loop Powered Acceleration (g's) Transmitter, Side Entry Integral Armored Cable (IP65)

  • 4-20 mA Vibration Acceleration (g's) Sensor
  • 10 Hz to 5.0 kHz Standard Frequency Range
  • RMS or Peak Detection
  • Side Entry, Integral Braided Armored Cable
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +248 °F (-25 to +120 °C) Temperature Range
  • 1/4" x 28 UNF Captive Bolt

CMCP422ATS-I Data Sheet

Display and Relay Module for Voltage or Current Output Sensors CMCP730D Relay and Display Module

  • Universal Display and Relay Module
  • Accepts Voltage, Current, RTD or Thermocouple Inputs
  • Compatible with any 4-20mA Sensor or Transmitter
  • Local LCD Display
  • Local Alert and Danger Indicators
  • 4-20mA or Voltage Output
  • Two Relay Outputs
  • Latching or Non-Latching Relays
  • Adjustable Time Delay

CMCP730D Datasheet

   
 
1