-
You are here:Home >
Intrinsically Safe Acceleration 4-20 mA Output Sensor, Top Exit, MS 2 Pin Connector

CMCP422AT-C/IS Intrinsically Safe 4-20 mA Sensor, Top Exit, MS Connector

$
Choose your options:
422 Series Range(required):
Signal Detection(required):
Connector Type(required):
Product Code: CMCP422AT-C-IS
Typical Applications
Fans, Motors, Pumps, Compressors, Centrifuges, Conveyors, Air Handlers, Gearboxes, Rolls, Dryers, Presses, Cooling, HVAC, Spindles, Machine Tooling, Process Equipment and many more.
Features
  • Loop Powered
  • Acceleration (g's) Output (10 Hz to 5.0 kHz)
  • RMS or Peak Detection
  • Top Entry, 2 Pin MS Connector
  • Multi-Agency Accredited: ATEX, IECEx, CSA and UL Approved
  • Interfaces Directly to PLC/DCS Systems
  • -13 to +248°F (-25 to +120°C) Temperature Range
  • 1/4" x 28 UNF Mounting Stud Included
The CMCP422AT-M12/IS is loop powered 4-20 mA output sensor which is capable of interfacing directly to an analog input card on a PLC or DCS system. The 4-20 mA output is proportional to the full scale range in terms of g's Acceleration and are capable of transmitting signals over a long distance without signal loss. The M12 connector option allows the sensor to work with a separate cable assembly such as the CMCP605M series cables.
Empty Cart