Sensor Inputs: 4 (100mV/g accelerometers included with kit)
Power: Accepts 110 VAC or 220 VAC, 60 or 50 Hz
Frequency Response: (-3 dB) 2 Hz to 20 kHz.
Buffered Output: BNC Connector 0-20 kHz.
Accuracy: 5.0 % of Full Scale Range.
Output: 4-20 mA proportional to the full scale range.
Maximum Load: 600 Ohms Resistive per channel
Sensor and Cable:
Sensor Type: 100mV/g ICP Accelerometer (4 Included with Kit)
Cable Length: 32' (10m) (4 Included with Kit)
Operating Temp.: -20oC to +80oC (-4oF to +176oF).
Storage Temp.: -55oC to +125oC (-67oF to +257oF).
Relative Humidity: 0 - 95% Non-Condensing.
Approvals: NEMA 4X, NEMA 4, IP66
Vibration Monitor Part Number: CMCP530A-100A-02R
Pre-Packaged Enclosure Part Number: CMCP5301 Series
Sensor Part Number: CMCP770A
Cable Part Number: CMCP602L-32-01-01
CMCP5300K Series Monitoring Systems are one, two, four and six channel
Vibration Monitoring Protection System Kits that have been designed for use on
typical rotating machinery such as motors, pumps fans, turbines, compressors,
chillers, etc. The CMCP5300K Series accepts inputs from the supplied 100 mV/g
accelerometers, conditions the input signals to velocity and provides a digital
display and alarm status indication.
Analog outputs (4-20 mA) are provided for each channel for interface to a PLC
or DCS for trending, alarm and operator interface. The alarm contacts for the
OK circuit, and Alert and Danger may be interfaced to machine control and
shutdown systems for a complete vibration protection solution. A BNC Buffered
Output Connector is available on each monitor to provide a connection for
further fault analysis with a vibration data collector, such as SKF's Microlog.
The system is a pre-wired turn-key package with power supply, and bright LED
displays. The power supply accepts 110 or 220 VAC, 50 or 60 Hz. They are
available in either an English or Metric configuration.
The CMCP5300K Series Monitoring Systems come standard with STI’s
CMCP530A-100A-02R but are also available with any other CMCP500 Series
Monitors, please contact STI for more information. CMCP770A General Purpose
Accelerometers and CMCP602L-32-01-01 Cables are also included. The enclosure is
available in NEMA 4X Fiberglass, NEMA 4 Painted Steel and NEMA 4X Stainless
Steel. An optional sensor installation kit is available to assist in installing